What Are You Doing For An SES Light?
Thread Starter
TECH Junkie
Joined: Dec 2005
Posts: 3,092
Likes: 11
What Are You Doing For An SES Light? Just wondering what some of you are doing for an SES light in our vintage cars? Mine is a 1965 Buick Skylark. I will be making my own instrument panel behind the current glass face. I plan on LEDs for the turn signals but thought there might be something on the market that says SES.
Last edited by 1989GTA; Jun 24, 2012 at 08:32 PM.
I converted the factory "dummy light" gauges in my 66 Chevelle to the SS style gauges. These gauges are actual gauges rather than warning lights. This left the warning lights on the dash unused. I plan to use my "GEN" warning light for the SES light. I may end up using the "TEMP" or "OIL" light to remind me when I have my converter manually locked.
TECH Fanatic
Joined: Oct 2011
Posts: 1,356
Likes: 2
From: Felton Pa
In my 70 nonA/C car the panel in the top center of the dash where the A/C vent would be I drilled a 1/2" hole in the panel and mounted a green light that I bought at the local parts store for an SES light. Green only 'cuz they didn't have a red or orange one.
Just used a Red Led light.. no biggie.. wire and mount just about anywhere you want.
Some have used the OEM GEN light (or any other) on your exisitng dash if it is not being used.
Some have used the OEM GEN light (or any other) on your exisitng dash if it is not being used.
Just an FYI, if you use an LED it has to have a resistor with it (or built in to the LED Assembly) so there is a load in the circuit. If you dont put the resistor, the wire will 'look' like it is shorted to ground.
Jon
PSI
Jon
PSI
__________________
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
Trending Topics
If you need directionals, brake, brights, SES, etc, check these out.
http://www.newvintageusa.com/panels.html
http://www.snakebite.com.au/logodash...ach-p-494.html
http://www.newvintageusa.com/panels.html
http://www.snakebite.com.au/logodash...ach-p-494.html
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
I went to the junk yard and pulled the "service engine soon" piece out of the dash of a late model car and put it in my original dash where the unused "temp" light used to be.
Damn that's what I was gonna say, looks good, and what I plan on doing. If you get it out of a cluster that's already dicked up they may not charge you anything for it.
I saw something on another site that should work too. This person took some colored film gel (the stuff professional photographers use over their lights to change the color in a shoot) and put it over the overlay in his gauge cluster to change the color in the cluster. You could use some of this film, cut to fit, and get a SES sticker made to go on it. It would be a cheap route to go if you wanted to try it. I like the idea of stripping the SES piece out of a later model though. I just may do that in mine.