Jimbo1367

Ok. Thanks. That’s still a lot of miles. I’ll be glad once u have enough to post about ur next swap.

Jim

rodstored-72

ls1nova71, very nice long term driver . I am a member on the "other board" and am currently in the middle of a 2013 LS truck swap into a '86 C10. I am wondering if you would be able to help me with a question? I am trying to connect the TCC wires between the 2 trucks. I have the 2 (lt blue/wht stripe) wires ID... both come from the same pin at the '13 ECM. I have ID the lt. blue wire & brown/wht stripe wire from the '86 switch (in cab). The '86 lt blue wire comes thru the firewall with a green wire both end at a connector (open), the green wire then runs single to a connector (byself). would you be willing/able to help me with how/what to connect at what point(s)? any assistance would be greatly appreciated .... thank you again!

ls1nova71

iTrader: (4)

I'll message you on the other site.

rodstored-72

ls1nova71,

thank you for your time and assistance, i look foward to reading the message.

canadian67shortbox

Hi I was reading on a wonderful post you wrote up on 67-72 truck forum. Its pertains to the truck 120MPH template I would like to purchase one of these stencils kits if you are still offering?? I tried to sign up to 67-72 truck forums but its disabled. Hope you help a guy out.
Thanks Colin

ls1nova71

iTrader: (4)

Yes I have some still. Send me a PM, I can't seem to send you one?

Plumber452

ls1nova71's stencils and decals are Great!!! I was really pleased with the way my speedo turned out using his stuff. My only disappointment is that I didn't follow his instructions about using super light coats of paint on the speedo. I got in a hurry and applied to much paint and it bled under the stencil in a few places. So, just remember, very very light coats

canadian67shortbox

Yeah sorry i'm new to this site. I can't see where I could message you either. Humm Maybe its something that I have to sign up for. let me do some reading. Thanks you for responding to my post i appreciate it.
Thank you

Jimbo1367

Move your mouse to the persons screen name and click or double click it. A window should open and on the bottom it will have options. Choose. “ Message”

canadian67shortbox

No it doesn't work I do remember reading about something on forum about a 10 day waiting period before I could access some of its features!! Im sure its been more than 10 days but I will give it a few more. Thanks for the help

canadian67shortbox

Also when I click on my name I see where it says "message"

Jimbo1367

That’s it I believe. Click it.

tim61

I really appreciated reading this thread. I have a 1970 C-10 LB that I bought from the original owner 31 years ago. I drove it for 10 years with stock drive train, the pulled the OEM engine and trans out to install a 98 LT1. The project stalled long enough for me to get rid of the old throttle body LT1 and aquire a 2002 Silverado LS. I really want to follow the leads shown here and use as many stock/modified parts as possible. Very impressed how the OEM cruise, A/C, etc. was incorporated into this build. Great incentive for me to get going on mine!

Incoma

daaaanz67 - Did you have to swap the pickup tube or dipstick tube with the pan swap? Thanks.