Stainless Works to expand LS swap header and exhaust line up. SUGGESTIONS!
#121
#122
Also fenderwell exit for 55-57 Chevy passenger cars. Lots of people are building gassers right now.....and an LSX based gasser would be awesome. Especially topped with one of Holley's newer tunnel ram intakes. I bet it would be relatively easy to build one part number header to fit both them and the Chevy II's mentioned above.
#127
What are the issues with headers in the 240sx swap? I know in the Miata swap, the steering column ends up hitting the runner. Sanderson makes a cheap shorty header but quality isn't great and the primaries are 1.5.
Flyin Miata makes some that are copies but have the same issues.
http://www.flyinmiata.com/index.php?...umber=26-06100
A 1.75 primary LT would be great if it could somehow encompass a group of swaps. I know the BMW have steering column issues too.
Would be cool if an "import swap header" could be made to handle the BMW, Nissan and Miata issue but allow the buyer to handle the piping after the collector.
Flyin Miata makes some that are copies but have the same issues.
http://www.flyinmiata.com/index.php?...umber=26-06100
A 1.75 primary LT would be great if it could somehow encompass a group of swaps. I know the BMW have steering column issues too.
Would be cool if an "import swap header" could be made to handle the BMW, Nissan and Miata issue but allow the buyer to handle the piping after the collector.
#131
Stainless Works is gearing up to add a couple more LS swap vehicles to the Stable. We are curious what you guys are working on that we don't already cover. This will also serve to have a single list for anyone doing searches for "SWAP HEADERS"
List of Current Stainless Works LS Swap headers and exhausts
All headers and exhausts are made from 304L Stainless Steel and come with a lifetime warranty on materials and workmanship.
*TURBO APPLICATIONS*
> LSXT - Upswept Turbo header for LS motor. Fits Camaro (4th gen upside down), Chevelle, and Nova with minimal if any fabrication. May fit other applications
> LS1DFT - Downswept Turbo header for LS motor. Fits 4th Gen with A/C and has been used on 5th Gen with minimal modications
*CAMARO/FIREBIRD/TRANSAM*
> CA679WD - 67-69 F-Body with Wayne Due or comparable subframe.
> CALS1 - 67-69 F-Body with rack and pinion steering conversion
> CALS1SB - 67-69 F-Body with stock steering box (recently redesigned with extra room around box)
> CA679LSCH - 67-69 F-Body exhaust to connect to Stainless Works headers. Chambered Round mufflers with no X pipe
> CA679LSD - 67-69 F-Body 3" exhaust to connect to Stainless Works headers. Turbo style mufflers with X pipe
> Second Generation parts not available
> LS swap for 82-92 available through Hawk's ThirdGen
*Chevelle/El Camino/Monte Carlo*
> CVLS1 - 68-72 Chevelle 1 7/8" primaries with 3" collector. For use with stock steering box
> CVLS1ST -68-72 Chevelle 1 3/4" primaries with 3" collector. For use with stock steering box
> CV6872LSD - 68-72 Chevelle 3" exhaust system to connect to Stainless Works headers. X pipe and chambered turbo mufflers
*Corvette*
> C3NCSE - 63-82 Corvette with Newman Chassis with factory side exhaust
*Nova*
> CALS1 - 68-72 Nova with rack and pinion steering
> CALS1SB - 68-72 Nova with stock steering box
> NVLS1 - 62-67 Nova with Church Boy Rack and Pinion steering
> Mid-length headers for 62-67 Nova available through Church Boy Racing
> NVLS3S - 62-67 Nova 3" Turbo Chambered exhaust with X pipe for connection to SW headers
We are thinking 2nd gen Fbody and a 63-82 Corvette should be a good addition. We missing anybody else?
-Jason
List of Current Stainless Works LS Swap headers and exhausts
All headers and exhausts are made from 304L Stainless Steel and come with a lifetime warranty on materials and workmanship.
*TURBO APPLICATIONS*
> LSXT - Upswept Turbo header for LS motor. Fits Camaro (4th gen upside down), Chevelle, and Nova with minimal if any fabrication. May fit other applications
> LS1DFT - Downswept Turbo header for LS motor. Fits 4th Gen with A/C and has been used on 5th Gen with minimal modications
*CAMARO/FIREBIRD/TRANSAM*
> CA679WD - 67-69 F-Body with Wayne Due or comparable subframe.
> CALS1 - 67-69 F-Body with rack and pinion steering conversion
> CALS1SB - 67-69 F-Body with stock steering box (recently redesigned with extra room around box)
> CA679LSCH - 67-69 F-Body exhaust to connect to Stainless Works headers. Chambered Round mufflers with no X pipe
> CA679LSD - 67-69 F-Body 3" exhaust to connect to Stainless Works headers. Turbo style mufflers with X pipe
> Second Generation parts not available
> LS swap for 82-92 available through Hawk's ThirdGen
*Chevelle/El Camino/Monte Carlo*
> CVLS1 - 68-72 Chevelle 1 7/8" primaries with 3" collector. For use with stock steering box
> CVLS1ST -68-72 Chevelle 1 3/4" primaries with 3" collector. For use with stock steering box
> CV6872LSD - 68-72 Chevelle 3" exhaust system to connect to Stainless Works headers. X pipe and chambered turbo mufflers
*Corvette*
> C3NCSE - 63-82 Corvette with Newman Chassis with factory side exhaust
*Nova*
> CALS1 - 68-72 Nova with rack and pinion steering
> CALS1SB - 68-72 Nova with stock steering box
> NVLS1 - 62-67 Nova with Church Boy Rack and Pinion steering
> Mid-length headers for 62-67 Nova available through Church Boy Racing
> NVLS3S - 62-67 Nova 3" Turbo Chambered exhaust with X pipe for connection to SW headers
We are thinking 2nd gen Fbody and a 63-82 Corvette should be a good addition. We missing anybody else?
-Jason
#133
Sent you a PM.....I vote for 2nd gen Camaro swap headers. Here are a couple pics of my car, I am doing a 6.0 swap with a T56 6speed. I am only 3 hrs away, and could let you use my car for R&D.
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
#134
Dropped my 70 Camaro off yesterday at Stainless Works for them to start designing the headers for the 2nd gen Camaro / Firebird. Jason and George are awesome to deal with and great people.....I encourage any of you looking to purchase, to give them a shout.
#135
Any idea when the headers will be available for purchase?
#136