89 Formula getting 5.3
#21
TECH Apprentice
iTrader: (9)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
behind the drivers side kick panel there is a tar cover of sorts that the vats system glued to. there are 4 wires to the vats system, 2 large, and 2 small. cut and splice the two large wires together.....done. i think they are purple and yellow, but i can't remember for sure. also, can you hear your fuel pump priming when you cycle the key?
#24
TECH Resident
Thread Starter
iTrader: (9)
Join Date: May 2009
Location: Austin/Cedar Park
Posts: 809
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
So i put a test light on the injectors, The hot with key on is working fine, But the signal wire on the other hand... When I put the test light on the signal wire of the injector, the injector fires and the light comes on and stays on...
I checked my grounds, they are working.. there are 4 PCM grounds correct?
What else could it be?! This is something simple..
I checked my grounds, they are working.. there are 4 PCM grounds correct?
What else could it be?! This is something simple..