Going price of f body pan
#2
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Since they don't fit a lot of the common swaps, I can't imagine you'll get a lot of interest, but for someone who needs it (like someone swapping an LQ4 into a 4th gen), I'd think it'd be worth $100-150?
#4
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Unmodified F-body oil pan worked just fine in my 2nd gen Camaro swap. You might also try to post at www.nastyz28.com
#5
FormerVendor
iTrader: (26)
Join Date: Oct 2010
Location: Metairie, LA
Posts: 1,528
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i think there's a big demand for the f-body pans, especially to the guys swapping LS motors into trucks. i sold mine for $200 & could have sold it 5 times for that price. that was complete with tray, tube, & dip stick.
#7
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Why send that 200 or 250 for an camaro oil pan when you can buy this and this would work
http://www.jegs.com/i/Chevrolet+Perf...12593/10002/-1
http://www.jegs.com/i/Chevrolet+Perf...12593/10002/-1
Trending Topics
#8
On The Tree
iTrader: (9)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Why send that 200 or 250 for an camaro oil pan when you can buy this and this would work
http://www.jegs.com/i/Chevrolet+Perf...12593/10002/-1
http://www.jegs.com/i/Chevrolet+Perf...12593/10002/-1
I sold my f-body pan for $170 to help fund my Autokraft pan.
#10
TECH Apprentice
iTrader: (16)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Chevelles use them also. I had one, and it fit perfectly, then I got that bright idea to go dry sump. If it is in good condition, there will be a lot of interest as new it can get quite expensive for a stock pan. Btw street and performance charges $260 core for this pan in exchange for their modded pan, so if people want to buy it as a core, it is still a good deal.
#11
Launching!
iTrader: (7)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Why send that 200 or 250 for an camaro oil pan when you can buy this and this would work
http://www.jegs.com/i/Chevrolet+Perf...12593/10002/-1
http://www.jegs.com/i/Chevrolet+Perf...12593/10002/-1
Have you looked at the CTS-V pan? it is alot like the "muscle car" or H3 pan..just does not hang so low. Check the stickies here...a lot has been discussed.
When I did my pan swap (I had the H3/"muscle car" pan) last year, I found that the fbody pan hit my crossmember by 1/2". Called BRP hotrods, they would give me a CTS-V pan for my f-body and H3 pan(I would eat shipping both ways). For about the same price, I went with street and performance, (Mesa, Arkansas). They modified the pan so it cleared the crossmember and my pan does not hang at all below crossmember. Side note: I bought my car with the swap already done...and knew I needed to swap pans...in fact, part of the sale included the OEM fbody pan.
S&P does do something for 1 Gen fbodies...not sure what.
http://www.hotrodlane.cc/Streetstori...ls1camaro1.htm
If you are set on selling it...look at the history here in the "for sale" section and on ebay.
I sold my H3/muscle car pan there...funded my f body pan mod.
#14
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Not wanting to crap your thread but the link below gets you a brand new Fbody pan with gasket, bolts, windage tray, for $198.00 and the pickup tube is sold separate for $34.00 so for a little over $230.00 you get a brand spanking new one. From a GM dealer, Wait there's more hold on to your hats, Free Shipping, you can't beat that monkey with a wet noodle for new parts shipped free. You guys that buy one owe me a beer. If someone already bought the other one for sale in this thread he is kicking himself in the *** right about now.
https://www.superchevyperformance.co...tCode=12628771
https://www.superchevyperformance.co...tCode=12628771