alternator relocation bracket
#2
Staging Lane
have a alt. bracket from a 09 pontiac g8 gt
puts if low on the passenger side
check gm parts direct for diagram for placement
or look at pictures of an L76 engine
s
puts if low on the passenger side
check gm parts direct for diagram for placement
or look at pictures of an L76 engine
s
#5
LS1Tech Premium Sponsor
iTrader: (40)
We offer our BMR alternator relocation bracket that should work for you.
Here is a link to it off our website:
http://www.bmrsuspension.com/index.c...&productid=248
Give me a call and we can verify if our alternator relocation bracket will work for you.
Here is a link to it off our website:
http://www.bmrsuspension.com/index.c...&productid=248
Give me a call and we can verify if our alternator relocation bracket will work for you.
__________________
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!
#7
LS1Tech Premium Sponsor
iTrader: (40)
On a 4th gen F-body it will but I can't guarantee fitment with your setup since I have no clue how you are setting the steering up on the car. If you had the motor installed in the car along with the steering component I could tell you whether it would work with some measurements.
__________________
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!
Trending Topics
#9
I was able to get mine to work with 4th gen factory alt brackets in low drivers location. Was tight but it fit. Thats is with 1 inch set back plates too. But, im pretty sure you have front steer so may not work for u. And you can drill and tap your block to fit that bmr bracket and/or factory 4th gen setup.