'65 C10 SWB Build
#61
TECH Regular
Thread Starter
iTrader: (6)
Join Date: Sep 2012
Location: Austin, Texas
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
![](https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xfp1/t31.0-8/10700773_10205087191163723_6131971666489307157_o.jpg)
Just wanted to see what it would look like with the new 29" wheel/tire setup.
This is as low as it will go with the factory trailing arms and no c notch.
Planning on running the PB stage 2 deluxe rear, so I'm sure it will do down another few inches.
also, the motor is pretty much ready to go in.
![](https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/10366025_10205086100736463_4116047156857787858_n.jpg?oh=331132ae44337b1665ed245eef747ea6&oe=54BD4A10&__gda__=1420778246_2956308ac3173ceb950634ddfff1f7d1)
#62
TECH Regular
Thread Starter
iTrader: (6)
Join Date: Sep 2012
Location: Austin, Texas
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Parts are piling up, but no PB setup yet. 4-6 week build time apparently :/. I probably should have just made all the pieces myself. Oh well, already paid for.
CPP Disc brake setup
![](https://scontent-b-dfw.xx.fbcdn.net/hphotos-xpf1/v/t1.0-9/1969161_10205109265035556_4275290383710337453_n.jpg?oh=764867101fb6cef1aa27da4262e808d6&oe=54C4A31B)
ECE LS motor mounts - these things are heavy duty.
CPP Disc brake setup
![](https://scontent-b-dfw.xx.fbcdn.net/hphotos-xpf1/v/t1.0-9/1969161_10205109265035556_4275290383710337453_n.jpg?oh=764867101fb6cef1aa27da4262e808d6&oe=54C4A31B)
ECE LS motor mounts - these things are heavy duty.
![](https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/10410394_10205106816654348_5333046435386515095_n.jpg?oh=c7972a3ad74529b96ce5692860082db5&oe=54C13318&__gda__=1422335079_edeeae7aa755f94e0a8cb9c2f588c13c)
Last edited by onetype; 10-14-2014 at 03:08 PM.
#67
TECH Regular
Thread Starter
iTrader: (6)
Join Date: Sep 2012
Location: Austin, Texas
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Just got shipping notification on suspension parts! Hurray!
Anyway, both sides of the cab look like this at the moment. About to start installing nearly $500 in patch panels (super inexpensive compared to many classic cars).
Anyway, both sides of the cab look like this at the moment. About to start installing nearly $500 in patch panels (super inexpensive compared to many classic cars).
![](https://scontent-b-dfw.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/q84/s720x720/1891031_10205179308426597_7090271917517816331_n.jpg?oh=f9a7ef11d3c3885754345c86d01fb180&oe=54E636CD)
#68
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Keep the pics coming !!!
#69
TECH Regular
Thread Starter
iTrader: (6)
Join Date: Sep 2012
Location: Austin, Texas
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
So my measurements were quite off this morning. Had to add a few small patch pieces. Driver side is mostly in. Tomorrow I'll finish up the footwell while I wait for the lower A pillar patch from LMC.
![](https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xap1/v/t1.0-9/10702140_10205187447350065_4573641868956040543_n.jpg?oh=4d4400269b9c3e0cddc062fe9c072b5b&oe=54E84715&__gda__=1420662336_02ea420987f9eb6320b3d33d83c2a81d)
#74
TECH Regular
Thread Starter
iTrader: (6)
Join Date: Sep 2012
Location: Austin, Texas
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
You have to find a c60 grill, then swap buckets, then drill out all the rivets and weld in new mounting plates to move the "Chevrolet" emblem inside the grill. Probably a lot more work than most want to do, but yes, looks a thousand times better than the factory 64-66 c10 grill