72 Comet with a turbo/LS 5.3 in it's future.....
#521
Today after deciding what to do with the breather tanks I worked on labeling the existing wire..... I am using some of the stock wiring harnesses for the wipers, heater and courtesy lights..... I also have the power window and stereo harnesses in there from the first time I wired under the dash..... I had to identify all the fused power wires for all those harnesses.....
#522
Well I am back online again now after being down for a couple days..... I had a modem take a crap..... What the hell it was a dinosaur anyways, it as only 8 or 9 years old.....
Over the weekend I was able to rearrange the wiring in the trunk for the water/meth kit..... I could not mount the bottle and pump because I did not have the brackets back from the powder coater yet, however I did get them back today...... I also worked on the underdash wiring a little more.....
Here's what the trunk is looking like, not much new to see under the dash.....
Over the weekend I was able to rearrange the wiring in the trunk for the water/meth kit..... I could not mount the bottle and pump because I did not have the brackets back from the powder coater yet, however I did get them back today...... I also worked on the underdash wiring a little more.....
Here's what the trunk is looking like, not much new to see under the dash.....
#530
Frank,
What camera are you using for this thread? Megapixel? The detail on the pics are amazing. If this was covered are ready, mybad. LOL
What camera are you using for this thread? Megapixel? The detail on the pics are amazing. If this was covered are ready, mybad. LOL
#532
#534
TECH Senior Member
iTrader: (7)
Frank,
Wiring is scary and I think many people fear it. One thing that I found useful when doing an update with wiring, is to really show the details. Show us fancy connectors, crimp tools that you're using, techniques, etc...
Andrew
Wiring is scary and I think many people fear it. One thing that I found useful when doing an update with wiring, is to really show the details. Show us fancy connectors, crimp tools that you're using, techniques, etc...
Andrew
#538
Nothing picture worthy, still working on under dash wiring..... Getting pretty close on the under dash, but had to get a different fuse block because I was not happy with the one I had..... I keep having to change stuff, last week I found out my under dash cruise control bracket did not have enough clearance for the amount of travel in a ls1 throttle body..... I got that straightened out this week.....