72 Comet with a turbo/LS 5.3 in it's future.....
#943
Got the car up on stands today, removed the wheels and remove all the brake fluid from the braking system..... Then I got under it so I could finish what I was doing when I screwed my eye up a while back..... Made the filler pieces for the exhaust clearence notches I made in the underside, welded them in and cleaned the area up(always fun to weld to the factory galvanized areas in the car).....
The following users liked this post:
Project GatTagO (05-17-2020)
#944
Looks good Frank. How much longer?
#945
Thanks..... Unfortunately It's still going to be a little while..... There is still quite a bit of fab work to do in the front of the car and the ac needs to be mounted under the dash..... Plumbing for the ac/heater, trans cooler lines, front brake lines will need to be rearranged..... Then the whole under hood area needs to be repainted..... I still need to finish the front stone guard mods and mount the fiberglass front bumper..... Oh yeah, I need to mount gauges and rewire the whole damn thing.....
At the rate I work this could take a while.....
At the rate I work this could take a while.....
#946
Well, I guess once again it's been quite some time since I posted any progress..... I have bee working on it here and there..... I mocked up a vintage air unit under the dash, put the necessary holes in the firewall, and made all the under dash lines and hoses..... I made the trans coooler lines from the cooler to bulkheads in the lower rear apron behind the firewall..... Unfortunately I seem to have deleted pic's of this progress off my phone accidentely.....
Then I trimmed the front edges of the towers off and finished them with some 1/2" tube..... I removed all the front suspension and stripped all the paint off the front of the car..... I welded up some unnecessary holes in the firewall(some of which I made for the previous combo?)..... Since I stripped everything in the front to bare metal I have been chasing surface rust(it's been super humid here lately).....I still have some mods to make around the towers, but today I cleaned up the cowl and firewall area and got some epoxy primer on it(atleast it solves the surface rust issues in these areas).....
Then I trimmed the front edges of the towers off and finished them with some 1/2" tube..... I removed all the front suspension and stripped all the paint off the front of the car..... I welded up some unnecessary holes in the firewall(some of which I made for the previous combo?)..... Since I stripped everything in the front to bare metal I have been chasing surface rust(it's been super humid here lately).....I still have some mods to make around the towers, but today I cleaned up the cowl and firewall area and got some epoxy primer on it(atleast it solves the surface rust issues in these areas).....
The following users liked this post:
Project GatTagO (09-13-2020)
#950
TECH Addict
iTrader: (27)
Wow, I haven't checked in on this build in a while, you have been busy! Last time I saw it there was a turbo 5.3, now it's a nitrous 6.0. Looks amazing! your attention to detail is top notch!
#951
Well it looks like I missed a lot. This looks awesome Frank!!!
#952
Thank you Sir.....
#954
TECH Fanatic
iTrader: (5)
Nice build, Frank. I’m surprised you didn’t just eliminate the shock towers all together and go with a Pinto/ Bobcat/ Mustang II style clip or some variation of one .So that perky blue engine just didn’t cut it ? Lol...you change it, good idea, something about a light blue engine. Glad to see you back at it, I hope you get the way you want and go roll a good number (on the track).
The following users liked this post:
G Atsma (09-27-2020)
#955
Nice build, Frank. I’m surprised you didn’t just eliminate the shock towers all together and go with a Pinto/ Bobcat/ Mustang II style clip or some variation of one .So that perky blue engine just didn’t cut it ? Lol...you change it, good idea, something about a light blue engine. Glad to see you back at it, I hope you get the way you want and go roll a good number (on the track).
Thanks..... I didn't remove the shock towers because I do like to do some racing, and if you remove them it disqualifies the car from some classes(most true street classes do not allow it)..... They do however allow front strut/rack conversions if they are of bolt in nature and commercially available..... My crossmember is AJE and available to anyone.....
#956
Over the last couple weekends I seam sealed everything, got some body work done on the firewall and rear aprons, then primed those areas again..... I am not trying to make everything perfectly level, just getting rid of dimples and sharp transitions so it will look decent with paint on it..... Next weekend I will try and get the towers straightened out.....
The following 2 users liked this post by franktf:
Forcefed86 (10-05-2020), Project GatTagO (10-04-2020)
#958
I got the front end ready for paint about a month ago, masked it up, painted and textured the satin black on all the outside areas..... Then I masked it to paint the inside and top areas, I painted it and to my surprise the color looked teal until direct light was on it, then it was light blue(The color was called aquamarine firemist, the sample was a light blue and showed no signs of teal in off lighting)..... It wasn't a bad color, it just didn't look right with the blue interior color, so I got some new paint that is called true blue firemist..... I sanded it all down, prepped and masked it..... Then I put a sealer coat with the light blue epoxy primer I have, painted and cleared it..... This color I am very happy with.....
i painted it Sat night..... i unmasked it this morning and cleaned up some, I still need to get the lizard skin touched up under the front of the trans tunnel area, where I put exhaust notches in the chassis and exhaust hanger tabs on the rear frame but I wanted to let the paint dry this week..... I did get down the front suspension parts down and started cleaning them up, I put the front k-member back in so i will be able to move the jack stands next week when I take care of the lizard skin..... After that i will get it back on wheels again....
Here are some pics of the progress..... The shop lighting isn't fantastic so the last couple are with some good light to show the color and highlights.....
i painted it Sat night..... i unmasked it this morning and cleaned up some, I still need to get the lizard skin touched up under the front of the trans tunnel area, where I put exhaust notches in the chassis and exhaust hanger tabs on the rear frame but I wanted to let the paint dry this week..... I did get down the front suspension parts down and started cleaning them up, I put the front k-member back in so i will be able to move the jack stands next week when I take care of the lizard skin..... After that i will get it back on wheels again....
Here are some pics of the progress..... The shop lighting isn't fantastic so the last couple are with some good light to show the color and highlights.....
#959
That’s purty. Too purty to drag. I’d put it on the living room and use it as a conversation piece. But that’s just me LOL