Source for female connector like factory map sensor

Reply Subscribe

Thread Tools

Search this Thread

May 29, 2015 | 09:08 PM

vinceI

Thread Starter

Launching!

iTrader: (5)

Joined: Dec 2014

Posts: 211

Likes: 0

From: Jim Thorpe Pa

Source for female connector like factory map sensor

I'm in need of a female connector that's the same as the factory map sensor. I need to make a jumper from my bs3 harness to an external 3 bar map sensor so I don't have to cut the bs3 harness up. Anybody know where I can get one?

May 29, 2015 | 10:54 PM

pdsq98gt

TECH Regular

Joined: Sep 2007

Posts: 443

Likes: 3

From: Kansas City, MO

If you want to go junkyard hunting you could get the cam sensor connector that sits at the front of the upper intake on a 3100 90's w-body. You can depin the map sensor connector and make a jumper harness out of it because you can get both the female and male sides of this 3 pin connector. http://www.likeabigdog.com/grandprix/engine.jpg

May 30, 2015 | 07:56 PM

Project GatTagO

TECH Senior Member

iTrader: (7)

Joined: Mar 2003

Posts: 10,615

Likes: 1,883

From: Little Austin

If you want to use a LS3 style MAP sensor, you can use this:

https://holley.com/products/fuel_sys.../parts/558-416

Andrew

May 30, 2015 | 09:31 PM

vinceI

Thread Starter

Launching!

iTrader: (5)

Joined: Dec 2014

Posts: 211

Likes: 0

From: Jim Thorpe Pa

Thanks for the replies, I will check both of these out to see what will work best.

May 31, 2015 | 08:58 AM

SSSTANG#1

TECH Enthusiast

iTrader: (14)

Joined: Oct 2009

Posts: 617

Likes: 6

From: GA

Quote:

Originally Posted by Project GatTagO

If you want to use a LS3 style MAP sensor, you can use this:

https://holley.com/products/fuel_sys.../parts/558-416

Andrew

I may have one of these at home if you're interested.

May 31, 2015 | 09:11 AM

joyridin'

TECH Enthusiast

iTrader: (1)

Joined: Jan 2014

Posts: 628

Likes: 36

Per my post in another forum, there is more than one style LS3 MAP sensor. Newer models use a different 3 prong connector than earlier styles.

May 31, 2015 | 03:40 PM

vinceI

Thread Starter

Launching!

iTrader: (5)

Joined: Dec 2014

Posts: 211

Likes: 0

From: Jim Thorpe Pa

Quote:

Originally Posted by joyridin'

Per my post in another forum, there is more than one style LS3 MAP sensor. Newer models use a different 3 prong connector than earlier styles.

I'm not using an ls3 sensor I'm using the older style external 3 bar map sensor that uses a weatherpack style connector. I need a female connector to fit my harness to make an extension so I don't have to cut my big stuff harness up.

Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

Verdad Gallardo

6 Common C5 Corvette Failures and What's Involved In Repairing Them

Pouria Savadkouei

Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Verdad Gallardo

Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Pouria Savadkouei

Top 10 Most Powerful Chevy Trucks Ever Made!

Hennessey's New Supercharged Silverado ZR2 Has 700 HP

Verdad Gallardo

Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

Verdad Gallardo

Awesome K5 Blazer Restomod Comes With C7 Corvette Power

Verdad Gallardo

10 Camaros You Should Never Buy

10 LS Engine Myths That Refuse to Die

Verdad Gallardo

May 31, 2015 | 10:12 PM

grifter679

Teching In

iTrader: (2)

Joined: Dec 2012

Posts: 19

Likes: 0

From: San Francisco

lsxtune.com is great for all brand new connectors and pins

May 31, 2015 | 11:16 PM

#10

CattleAc

TECH Fanatic

iTrader: (7)

Joined: Dec 2007

Posts: 1,644

Likes: 429

From: Dakota Territory

Quote:

Originally Posted by Project GatTagO

Having multiple connectors inline doesn't make any sense because every connector is a potential point of failure. Just cut the wires, solder in some extension wires, and be done with it.

Andrew

I agree with Andrew...I think this is what I would do also...