New Holley Accessory Drive Systems Coming Soon
03-30-2017, 08:32 AM
#41
TECH Junkie
Thread Starter
Hey guys. I've seen a couple of users on different forums post that they've received their new Gen V Holley pans, so that must mean they are starting to trickle out. I don't know any more than that as none of us in the engineering department follow projects in detail that aren't specifically ours. The Holley cast aluminum pans are designed/developed by a completely different team than the one I am a part of.
03-30-2017, 10:06 AM
#42
TECH Senior Member
iTrader: (7)
http://www.chevelles.com/forums/56-p...-ss-z06-4.html
Andrew
03-30-2017, 10:33 AM
#43
This guy has one. Going into a 70 Chevelle.
http://www.chevelles.com/forums/56-p...-ss-z06-4.html
Andrew
http://www.chevelles.com/forums/56-p...-ss-z06-4.html
Andrew
03-30-2017, 11:24 AM
#44
The holley lowmount AC is shipping !!!
03-31-2017, 09:53 AM
#48
Well, yes. I got the 4th gen FEAD to fit using a truck offset. Was hoping I could squeeze the compressor in on the other side. It's real close, but no. If the frame was not already powder coated and the engine installed, a date with a rosebud would have clearanced it. A notch would not be necessary.
I'll go back to a custom bracket that fits tighter to the block. Rev. 1 already has been made, but makes contact with the sway bar. When I get the second version built, I'll post pics.
Tim
I'll go back to a custom bracket that fits tighter to the block. Rev. 1 already has been made, but makes contact with the sway bar. When I get the second version built, I'll post pics.
Tim
02-25-2023, 06:15 AM
#51
TECH Junkie
Thread Starter
No it wasn’t spetroff. The development of the Hooker Blackheart 3rd-Gen F-Body swap system preceded the design and release of the Holley low-mount A/C kit and the opportunity to validate it at a latter date never presented itself.