Exhaust Manifolds on 69 with LS1?
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Has anyone used C5 exhaust manifolds on a 69 Camaro. I am putting in a 5.3 iron block and looking for good manifolds.
I have heard that C4 or C5 fit, so looking for any advice or past experiences.
Thanks ahead of time.
I have heard that C4 or C5 fit, so looking for any advice or past experiences.
Thanks ahead of time.
Last edited by Pat64D; 03-17-2017 at 08:40 AM.
#5
TECH Senior Member
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Look for anything from '97(LS1) on up...
#7
Launching!
Join Date: Jan 2012
Location: Owensboro, KY
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
In a few weeks, I will have some Kooks long tube headers (LS swap for first gen Camaros) available. I have only had them on the car since 2014, probably less than 2K miles. Only reason Im taking them off is bc Im going single turbo.
Trending Topics
#11
![Smile](https://ls1tech.com/forums/images/icons/icon7.gif)
Has anyone have information on if the hooker headers with the Holley motor mounts. Do the long tube headers hang below the frame? My car is lowered about 2 inches. Do not want the headers to scrape. Deciding on going with long tubes or mid-length headers.
Thanks.
Thanks.
#12
TECH Fanatic
iTrader: (27)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
There are pictures in this conversion/hybrids section somewhere for the first gen cars. In my opinion they fit the best of any system out there. I bought there mounts and will get the headers soon. I have heard nothing but good feedback from anyone with them. One problem is you also have to use their oil pan with the Holley mounts.