Conversions & Swaps LSX Engines in Non-LSX Vehicles
Sponsored by:
Sponsored by:

LSx into 84 C4 Corvette

Thread Tools
 
Search this Thread
 
Old Nov 3, 2017 | 09:10 PM
  #1  
Will Speed's Avatar
Thread Starter
Teching In
 
Joined: Sep 2017
Posts: 34
Likes: 4
From: Edinboro, PA
Default LSx into 84 C4 Corvette

Hey guys,
I’m sure y’all have seen people in here doing this swap or heard people talking about but I have some questions for those guys and I can’t find any information through the search.
I have an ‘84 C4 Corvette with an L98 SBC, I’m ready to start the process of putting an LSx in it. I’m definitely on a budget so I’m looking for an iron block to begin with and I’m going to use an automatic tranny. I have a 700r4 in the car now but will probably just go with the 4L60e since it typically comes with iron blocks.
My first question is: I have seen these articles about Speedhound motor mounts but they seem to be out of business. So I was wondering if anybody had recommendations on motor mounts. I found some from vetteworks.com
I’d like to find the best mounts for the job as I’m sure multiple companies make different ones and they could effect the positioning of the engine.
Also, any help would be greatly appreciated or any deals on parts.

Thanks guys
Reply
Old Nov 3, 2017 | 09:53 PM
  #2  
sean byrd's Avatar
Launching!
 
Joined: Jul 2016
Posts: 220
Likes: 0
From: Martinsburg, WV
Default

Originally Posted by Will Speed
Hey guys,
I’m sure y’all have seen people in here doing this swap or heard people talking about but I have some questions for those guys and I can’t find any information through the search.
I have an ‘84 C4 Corvette with an L98 SBC, I’m ready to start the process of putting an LSx in it. I’m definitely on a budget so I’m looking for an iron block to begin with and I’m going to use an automatic tranny. I have a 700r4 in the car now but will probably just go with the 4L60e since it typically comes with iron blocks.
My first question is: I have seen these articles about Speedhound motor mounts but they seem to be out of business. So I was wondering if anybody had recommendations on motor mounts. I found some from vetteworks.com
I’d like to find the best mounts for the job as I’m sure multiple companies make different ones and they could effect the positioning of the engine.
Also, any help would be greatly appreciated or any deals on parts.

Thanks guys

check out corvetteforum. as for mounts just get cheap adapters so you can reuse the stock mounts. Finishing up a ls swap in my '88.
Reply
Old Nov 3, 2017 | 10:40 PM
  #3  
Will Speed's Avatar
Thread Starter
Teching In
 
Joined: Sep 2017
Posts: 34
Likes: 4
From: Edinboro, PA
Default

Originally Posted by sean byrd
check out corvetteforum. as for mounts just get cheap adapters so you can reuse the stock mounts. Finishing up a ls swap in my '88.
I am on CF as well.
How has the swap gone? Any details?
Reply
Old Nov 4, 2017 | 12:57 AM
  #4  
sean byrd's Avatar
Launching!
 
Joined: Jul 2016
Posts: 220
Likes: 0
From: Martinsburg, WV
Default

Originally Posted by Will Speed
I am on CF as well.
How has the swap gone? Any details?
I made a thread on corvetteforum. Do a search-there arent many who have followed thru with the swap in a c4 but its pretty straight forward. '84 Vette came with a L83 btw so unless someone swapped in an L98 it would be the crossfire 350.
Reply
Old Nov 4, 2017 | 10:54 AM
  #5  
Will Speed's Avatar
Thread Starter
Teching In
 
Joined: Sep 2017
Posts: 34
Likes: 4
From: Edinboro, PA
Default

Originally Posted by sean byrd
I made a thread on corvetteforum. Do a search-there arent many who have followed thru with the swap in a c4 but its pretty straight forward. '84 Vette came with a L83 btw so unless someone swapped in an L98 it would be the crossfire 350.
You are correct, it is a Crossfire and therefore an L83.

Can you post a link to that thread? I can’t seem to find it on CF
Reply
Old Nov 4, 2017 | 12:36 PM
  #6  
sean byrd's Avatar
Launching!
 
Joined: Jul 2016
Posts: 220
Likes: 0
From: Martinsburg, WV
Default

https://www.corvetteforum.com/forums/c4-tech-performance/3946634-lsx-4-3-swap.html
Reply
Old Nov 17, 2017 | 07:54 PM
  #7  
c_keith74's Avatar
On The Tree
 
Joined: Sep 2008
Posts: 148
Likes: 3
From: nashville
Default

on my 87 c4 i tried a cheap aluminum 4 position plate mount and a Melrose mount plates. I liked the melrose mounts better. Also the melrose headers pretty much fell in place.
Reply
Old Apr 11, 2018 | 10:48 PM
  #8  
MikeHolmen's Avatar
Teching In
 
Joined: Aug 2017
Posts: 19
Likes: 0
Default

I have a 85 vette with a 2005 LQ9 and 700R, works pretty good. I've used pretty much ton of the stock 85 vette parts.

Mine set-up drive by cable. I use shorty headers, aftermarket intake, ev6 42lb injectors.
Reply
LS1 Tech Stories

The Best V8 Stories One Small Block at Time

story-0

Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

 Verdad Gallardo
story-1

6 Common C5 Corvette Failures and What's Involved In Repairing Them

 Pouria Savadkouei
story-2

Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

 Verdad Gallardo
story-3

Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

 Pouria Savadkouei
story-4

Top 10 Most Powerful Chevy Trucks Ever Made!

 
story-5

Hennessey's New Supercharged Silverado ZR2 Has 700 HP

 Verdad Gallardo
story-6

Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

 Verdad Gallardo
story-7

Awesome K5 Blazer Restomod Comes With C7 Corvette Power

 Verdad Gallardo
story-8

10 Camaros You Should Never Buy

 
story-9

10 LS Engine Myths That Refuse to Die

 Verdad Gallardo
Old Apr 12, 2018 | 06:28 AM
  #9  
Andler2008's Avatar
On The Tree
5 Year Member
 
Joined: Oct 2015
Posts: 105
Likes: 1
From: Amelia, Ohio
Default

Good lord. The '84 corvette...........

That crossfire made that car a pig. I detailed one for my wife's grandfather who bought it at an auction. The LCD screen was no longer working, the fans were ghetto rigged from PO and then there's the crossfire. I loved driving the car, it rode on rails, but I couldn't understand what made it so slow lol

Although, I was able to fix the LCD screen by putting new polarized film on the front and all the sudden the gauges showed up bright as new! But I couldn't imagine that an LS would be too terribly hard to swap in. Good Luck and take lots of pictures!
Reply
Old Apr 12, 2018 | 08:52 AM
  #10  
JoeNova's Avatar
Restricted User
 
Joined: Mar 2014
Posts: 7,192
Likes: 109
From: Ohio
Default

I have a 4.8 in my 89. Swap was easy enough but I didn't keep A/C.
Even converting to a TH400 wasn't terrible.
Reply
Old Apr 12, 2018 | 09:13 AM
  #11  
fastlt1's Avatar
12 Second Club
20 Year Member
Photogenic
Liked
Loved
iTrader: (4)
 
Joined: Sep 2005
Posts: 1,512
Likes: 20
Default

What oil pan and accessories are people using
Reply
Old Apr 12, 2018 | 09:26 AM
  #12  
JoeNova's Avatar
Restricted User
 
Joined: Mar 2014
Posts: 7,192
Likes: 109
From: Ohio
Default

Originally Posted by fastlt1
What oil pan and accessories are people using
F-body oil pan, truck accessories.
Reply
Old Apr 12, 2018 | 05:50 PM
  #13  
MikeHolmen's Avatar
Teching In
 
Joined: Aug 2017
Posts: 19
Likes: 0
Default

I'm running holley low profile oil pan and 05 corvette accessory kit.

Reply
Old May 23, 2019 | 09:30 PM
  #14  
Will Thammavongsa's Avatar
Teching In
 
Joined: Apr 2017
Posts: 2
Likes: 0
Default

Originally Posted by JoeNova
F-body oil pan, truck accessories.
Truck accessories with the stock truck alternator bracket?
Reply




All times are GMT -5. The time now is 10:41 AM.

story-0
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

Slideshow: This heavily modified 1971 Camaro mixes classic muscle car styling with a fifth-generation Camaro interior and modern LS3 power.

By Verdad Gallardo | 2026-05-12 18:06:42


VIEW MORE
story-1
6 Common C5 Corvette Failures and What's Involved In Repairing Them

Slideshow: From wobbling harmonic balancers to failed EBCMs, these are the issues that define long-term C5 ownership and what repairs typically involve.

By Pouria Savadkouei | 2026-05-07 18:44:57


VIEW MORE
story-2
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Slideshow: A modern Camaro transformed into a retro icon, this limited-run "Bandit" build blends nostalgia with brute force in a way few revivals manage.

By Verdad Gallardo | 2026-04-21 13:57:02


VIEW MORE
story-3
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Slideshow: Cadillac didn't just crash the high-performance luxury vehicle party, it showed up loud, supercharged, and occasionally a little unhinged...

By Pouria Savadkouei | 2026-04-16 10:05:15


VIEW MORE
story-4
Top 10 Most Powerful Chevy Trucks Ever Made!

Slideshow: Top ten most powerful Chevy trucks ever made

By | 2026-03-25 09:22:26


VIEW MORE
story-5
Hennessey's New Supercharged Silverado ZR2 Has 700 HP

Slideshow: Hennessey has turned the Silverado ZR2 into a 700-hp off-road monster with supercharged V8 power and a limited production run.

By Verdad Gallardo | 2026-03-24 18:57:52


VIEW MORE
story-6
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

Slideshow: A one-off sports car that looks like a vintage Italian exotic-but hides a C6 Corvette underneath-just sold for the price of a new mid-engine Corvette.

By Verdad Gallardo | 2026-03-23 18:53:41


VIEW MORE
story-7
Awesome K5 Blazer Restomod Comes With C7 Corvette Power

Slideshow: A heavily reworked 1972 K5 Blazer swaps its off-road roots for a low-slung street-focused build with modern V8 power.

By Verdad Gallardo | 2026-03-09 18:08:45


VIEW MORE
story-8
10 Camaros You Should Never Buy

Slideshow: There are thousands of used Camaros on the market but we think you should avoid these 10

By | 2026-02-17 17:09:30


VIEW MORE
story-9
10 LS Engine Myths That Refuse to Die

Slideshows: Which one of these myths do you believe?

By Verdad Gallardo | 2026-01-28 18:10:11


VIEW MORE