LS1 in a 240sx.....240ss!!!!
Teching In
Joined: Feb 2005
Posts: 40
Likes: 0
From: CONCORD,NC
HERE IS MY RIDE THE GREEN ONE,EMAIL FOR MORE PICTS,THERE IS MORE OF THE MOTOR ON THE SIGHT http://www.streetracinggallery.com/c...ol=and&x=6&y=5
Teching In
Joined: Dec 2002
Posts: 30
Likes: 0
From: Coppell, TX
Originally Posted by teamspank
HERE IS MY RIDE THE GREEN ONE,EMAIL FOR MORE PICTS,THERE IS MORE OF THE MOTOR ON THE SIGHT http://www.streetracinggallery.com/c...ol=and&x=6&y=5
nice conversion. Is that front end carbon fiber? MY buddy and i are planning a rb26dett with a rb25det tranny ina 96 240sx. I told him he could drop my old ls1 motor in it but he wanted to go more towards the skyline motor. Which is fine.... its gonna be quick either way!!!
have you heard of anyone putting a set of s15 silvia taillights on a 96 240sx?
have you heard of anyone putting a set of s15 silvia taillights on a 96 240sx?
Launching!
Joined: Aug 2004
Posts: 222
Likes: 0
From: Huntsville, AL
http://www.streetracinggallery.com/g...erry%20407.JPG
You didn't mention the fact it was the later bodystyle car. That makes it even cooler. Good work.
You didn't mention the fact it was the later bodystyle car. That makes it even cooler. Good work.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Teching In
Joined: Jan 2005
Posts: 9
Likes: 0
SMcCarthy-both cars picturedare s14's.
I am very interested in the swap, as a matter of fact I thought I was original when I thought this up on my own a few months ago (I guess kind of since I want to use an s13).
So far between the both of you the only trouble mentioned was finding an oil pan that fit. But was anything done to the crossmember other than new mounts? Also, how did you set up the clutch? Did you just mount up the pedal and master/slave cylinders from an f-body?
teamspank-did you use a corvette LS1 and converte to a cable throttle body or did you simply put the corvette covers on an f-body LS1?
I am very interested in the swap, as a matter of fact I thought I was original when I thought this up on my own a few months ago (I guess kind of since I want to use an s13).
So far between the both of you the only trouble mentioned was finding an oil pan that fit. But was anything done to the crossmember other than new mounts? Also, how did you set up the clutch? Did you just mount up the pedal and master/slave cylinders from an f-body?
teamspank-did you use a corvette LS1 and converte to a cable throttle body or did you simply put the corvette covers on an f-body LS1?
Thread Starter
Teching In
Joined: Dec 2004
Posts: 15
Likes: 0
Originally Posted by teamspank
no.the car is being tuned at hawks third gen camaros right now in south carolina.
