240z LS1 Headers
Originally Posted by Juiced
Does Anybodu Know of Any Long Tube headers For the Early Datsun Z cars? Do any of ou know if any of the F body headers wil fit?
Originally Posted by T23LS1
same question for ls1 in a 67 tempest.
Originally Posted by RedLS1Iroc
same question for an LS1 third gen camaro
nope.. wont fit at all..
you have three options...
1 modding thirdgen hooker longtubes to work with the LS1.
2 hawks pricy (but stainless) headers..
3 custom headers
TECH Regular
Joined: Feb 2004
Posts: 438
Likes: 0
Custom headers What I did was order a set of headers from Street and Perfromance that I thought would come close to fitting my application. I told them not to coat them and to just tack weld the pipes to the flanges. After I test fit them I found that only one pipe on the driver's side needed to be modified to fit. Took that pipe out and had it rebent to my specifications. Welded all the pipes in and sent it out to Jet Hot. They will also sell you one side only so you can get one type for one side and another for the other.
Originally Posted by RedLS1Iroc
how would i have to mod the third gen hooker LT's???
like the pics here:
http://www.thirdgen.org/techbb2/show...hreadid=270765
Originally Posted by redmist
What I did was order a set of headers from Street and Perfromance that I thought would come close to fitting my application. I told them not to coat them and to just tack weld the pipes to the flanges. After I test fit them I found that only one pipe on the driver's side needed to be modified to fit. Took that pipe out and had it rebent to my specifications. Welded all the pipes in and sent it out to Jet Hot. They will also sell you one side only so you can get one type for one side and another for the other.
Trending Topics
Originally Posted by MrDude_1
like the pics here:
http://www.thirdgen.org/techbb2/show...hreadid=270765
thats pretty cool of them... most places wont do anything like that.
http://www.thirdgen.org/techbb2/show...hreadid=270765
thats pretty cool of them... most places wont do anything like that.
Their headers get really good dyno numbers, if I remember they got 18whp over the edelbrock headers.
Last edited by RiceKilla; Jun 2, 2005 at 08:03 PM.
Digging up an old thread....
How much was the kit and was the for a Z car?
Nope, just 'shorties'.
What I did was order a set of headers from Street and Perfromance that I thought would come close to fitting my application. I told them not to coat them and to just tack weld the pipes to the flanges. After I test fit them I found that only one pipe on the driver's side needed to be modified to fit. Took that pipe out and had it rebent to my specifications. Welded all the pipes in and sent it out to Jet Hot. They will also sell you one side only so you can get one type for one side and another for the other.
I believe www.jagsthatrun.com fab some longtube headers for v8 240z cars.
