I have found a lot of great info on here but after searching and reading posts I haven't found all of what I need.

I am working on a 75 K20 4x4 and swapping into it a 08 4.8 from a Tahoe with dbw. I have the ecm pin out to work with but I am also looking for the pin out on the plug for the under dash fuse panel, and firewall plug, also needed is the pin out for a stock gauge cluster 06 silverado. I am currently working on identifying all the leftover plugs on the engine harness so any help there would be great too.

 

With the help of Jaguar Specialties (Andrew Weinberg) my 1980 XJ6 is
receiving an LS1/A4 from a 2002 TransAm. 200 lbs lighter and
150 more horses. Goal: LuxoCruiser!
Paul "Jagdoc"
in Verde Valley, Az

 

1970 Buick GSX Tribute
2003 Iron 6.0L w/LS3 heads and intake
4L80e w/3500 stall & a 3.73 12 bolt

Headed to Kool Deadwood Nights in Deadwood South Dakota Aug 2013

 

1989 Chevy S-10.
5.3 carbed, Victor Jr, edelbrock carb, msd 6010, 700r4 rmvb, blazer 4x4 rear w 3.42s.

 

I'm installing a 2003 5.3 out of a Tahoe into my 1955 2nd series GMC

 

60 Biscayne, 2 dr.
5.3 vortec/4l60E dbw.

 

63 Nova Wagon black plate, with 58k miles.

5.3L (LM7) replacing 194 L6
4L60E Trans replacing 2 speed Powerglide

Plans are to include Church Boys suspension, headers and radiator with swap along with RetroFuel sending unit / tank set up.

[IMG][/IMG]

 

1974 SS Nova
LM7, Muncie 4 speed
No pics at the moment
I need help finding out how to hook this fuel injected lm7 hooked up and running to my muncie tranny. I need to know what parts I need to get this thing running and on the road. If you have any information regarding this swap please let me know ASAP please!

 

1) 1983 GMC High Sierra K2500 w/400, SM-465, NP208
2) LQ4/NV4500/NP241
3) Nothing good yet for pictures, just a dirty motor on a stand and truck I am still driving.

I want to put together a nicely built motor with great driveability, great power, and lots of longevity. Oh yeah, going to look as stock as possible. Looking at GMPP Manifold 88958675 with the FAST Air-Only throttle body 304149 hiding under a correct tall air cleaner. Can't decide if I should have the manifold bosses drilled for injectors or get the throttle body with the injectors on it. Was wanting to use a GM ECM, but I haven't been able to find info on it controlling 4 injectors (FAST) instead of the full compliment of 8 (manifold).

 

1969 Chevy C10 shortbed fleetside
2003 LM7 with 243's, custom ground cam, and edelbrock Pro Flo intake attached to a 700R4
http://s1192.beta.photobucket.com/us...0C10%20Revival

Prostreet pickup with a modern twist that will have some decent streetability. Will be going to a big single turbo before too long. Quite a few parts are already accumulated for the turbo setup

 

So I've made my choice to swap a ls into my 66 chevyII , where do I start? Any info is much appreciated.

 

1967 Chevelle coupe, bagged and mini tubbed. 2006 lq4 with 243 heads ls2 intake 90mm throttlebody and torq storm supercharger. Hope to be done with frame up build in 1 yr. $$$ being the deciding factor. lol

 

51 Nash (just like this one but more of a race car. This is the other car my father-in-law currently owns) Going for 10.50's in this build and going for a more sinister look, not polished at all



6.2 L92, headwork, cam and FAST 102 Intake w/ T350 to a Ford 9"




This is all being done on a 00 2wd Blazer frame, probably going to see me post a lot of questions about this swap since it's my father-in-laws/my first LS swap build.

 

1972 camaro rs
427 ls3 blueprint , 4l60e stage 3 performabuilt

 

Hey everyone!

Been a lurker here for a few months...and time I introduced myself.

I'm working on a new track car (for me) to go along with my daily driver...







I bought a '92 ZR1 rolling chassis last year...and had originally planned to drop a 427 Gen 1 into it until my machinist died and all my parts mysteriously were not there when I went to claim them.

SO, now I have to start over from scratch...and since there isn't really any good reason to do it with a Gen 1 motor, I started to research dropping an LSx into it.

Plans are:

• LS7 with 12.5:1 C/R running e85 or better
• Heads/cam/intake...shooting for about 650 RWHP...maybe a bit more later
• T56 with faceplated 2-5 gears
• Gen 1 Viper DANA 44 rear end
• C6 Z06 or Z07 calipers & rotors
• Full cage

With the ZR1 body I can cram 335's under the rear end so I have at least SOME good tire patches to maintain traction. This will be predominately a track/open road race car...street manners are not an issue.

I've already started acquiring some parts...

• Lexan rear hatch
• Carbon fiber top
• Carbon fiber clamshell hood

With the parts already acquired plus the LS7, it appears I'll have already shaved a good 300+ pounds from the car in LT1 trim and 450+ pounds in LT5 trim...all up high so the C/G will drop significantly.

This will be a slow process for me...I am just about to embark on building a new house for a friend. They start the foundation next week.

First I have a frame shop appointment to get the passenger frame rail pulled...it rode a guardrail at the drag strip after a blowout. Bent in ~1.5" and up ~ 1". Passenger door still operates easily...but needs to be addressed first before I start on anything else.



The cage I plan to model after the Greenwood G572 project...











I love that you can ACTUALLY see back between the "seats" with this design...basically putting a roll hoop above each seat.

Also, with the floor supports this way I can eliminate the "C" beam connecting the trans to the differential...and strengthen the entire drivetrain.

I hope to have it done by next year (2014) in time for track season...but I may be dreaming with everything I have on my plate.

Gonna be a fun project...can't wait to get started and will certainly keep everyone apprised of the progress as I plug away at various portions.

There is a wealth of knowledge here...you guys rock!

 

I'm new to the LS world and this is my first swap but I'm already super pumped about it, I find myself struggling to sleep at night after I have been working on it....with visions of car parts and mods I wanna make filling my head. Great site with tons of info....i'm on overload right now. lol

1. 1967 Camaro Coupe, 350/TH350
2. L99 6.2/6L80E
3. Just getting started so I will add pics later.

 

67 c10 longbox, 04 lm7, cam?, 76mm turbo, MM6 trans, ford 9'' not sure yet if leavn fuel injected or carbed E85

 

Using 99 Firehawk donor car for LS1 into 69 Camaro. I plan to use the engine, automatic trans, computer, harness and throttle cables. What other parts will I need to use and what can I make fit from this wrecked 99 Firehawk donor car? Radiator? rear end? disc brakes?

 

1) 1979 Trans Am
2) LY6, T56
3) https://ls1tech.com/forums/conversio...6-my-79-t.html

 

2001 5.3 vortec into a 90 2wd toyota pickup street strip truck running nitrous and th350. 2600 stall and slicks hoping for good times.