Conversion folks please list your conversion in here
Teching In
Joined: Jun 2007
Posts: 18
Likes: 0
From: Fairfield, CT
LS273Stingray I've been working on my project since '09.
1. 1973 Corvette BB Coupe, bought with no motor in it in '07
2. LS2 from an '07 Vette convertible w/5,800 miles, bought in '08.
3. TKO 500 5 spd, VP&B Performance Plus suspension and Rack Attack rack & pinion steering, Torque Thrust Originals in 17x8, etc.
3. Link to my blog: http://ls273stingray.blogspot.com/
Finally back from the painter and ready to complete.
1. 1973 Corvette BB Coupe, bought with no motor in it in '07
2. LS2 from an '07 Vette convertible w/5,800 miles, bought in '08.
3. TKO 500 5 spd, VP&B Performance Plus suspension and Rack Attack rack & pinion steering, Torque Thrust Originals in 17x8, etc.
3. Link to my blog: http://ls273stingray.blogspot.com/
Finally back from the painter and ready to complete.
Last edited by mffi115; Aug 27, 2014 at 05:13 AM. Reason: spelling
Teching In
Joined: Jan 2014
Posts: 2
Likes: 0
1970 Monte Carlo Swap 1. 1970 Monte Carlo
2. LS3/4L65E Connect and Cruise from GMPP
3. Link to pics/video:
http://www.firstgenmc.com/ubbthreads...816#Post443816
I've got a few pics and video at this link (MCNO1). I'll eventually get a dedicated site up and running.
2. LS3/4L65E Connect and Cruise from GMPP
3. Link to pics/video:
http://www.firstgenmc.com/ubbthreads...816#Post443816
I've got a few pics and video at this link (MCNO1). I'll eventually get a dedicated site up and running.
Teching In
Joined: Jul 2012
Posts: 33
Likes: 0
66 mustang fastback / Lq9 6.0 - 5 speed , home built and designed independent rear suspension , mustang II front suspension, tropical turquoise paint / bright white interior - I,m thinking it is a life time project,
Vern
Vern
Staging Lane
Joined: Dec 2006
Posts: 82
Likes: 0
From: Calgary, Alberta
97 BMW 318 4 door sedan. Texas Speed LS418, spec twin disk clutch,
rebuilt T56, AST coil overs, Vorslag headers and mounts. I started working on this around Dec 2011. I was in no hurry. Had it running now for a couple of months. Using it as a daily driver while it is nice out. Had it to a couple of shows. One show had 3 of 4 E36 BMWs with LS conversions!
rebuilt T56, AST coil overs, Vorslag headers and mounts. I started working on this around Dec 2011. I was in no hurry. Had it running now for a couple of months. Using it as a daily driver while it is nice out. Had it to a couple of shows. One show had 3 of 4 E36 BMWs with LS conversions!
Registered User
Joined: Oct 2014
Posts: 4
Likes: 0
my name is mike I am new to the ls world I am trying to find some info on a ls1 swap what I have is a 99 ls1 automatic Camaro I want to put motor and trans in a 2004 ls1 automatic gto body can this be done without major problems if someone could let me know I would be very thankful.
On The Tree
Joined: Sep 2013
Posts: 108
Likes: 0
From: Silverton, Oregon
'67 cougar, 2001 4.8 from Silverado, 700r4, transfer case and front drive from '94 bravada. All wheel drive cougar. Should be fun on autocross. No pics yet. Picking up bravada this weekend.
Teching In
Joined: Aug 2014
Posts: 7
Likes: 0
From: oklahoma
Hi ls1 fans new to the site .Have a 62 swb bbw,any difference on in stall of 2001 6.0 .Have started on a 66 c10 swb .engine is out of a 2001 gmc 2wd trans is a 4l60e dirty dingo slider mounts.
Last edited by nsm; Oct 19, 2014 at 09:04 PM.
Teching In
Joined: Jun 2014
Posts: 8
Likes: 0
From: Columbus OH
Re: Conversion folks please list your conversion in here 1952 Chevy Styleline Deluxe BelAir Coupe
5.3 LM7
4L60e -OR- NV2500(?) - Transmission TBD
I would love to keep this as a manual trans swap and looking for any advice on a truck 5 speed swap.
T-56 won't fit as I'd like to keep my bench seat.
Pics to come!
5.3 LM7
4L60e -OR- NV2500(?) - Transmission TBD
I would love to keep this as a manual trans swap and looking for any advice on a truck 5 speed swap.
T-56 won't fit as I'd like to keep my bench seat.
Pics to come!
Teching In
Joined: Oct 2014
Posts: 1
Likes: 0
hey guys, i got a 88 toyota supra, doing the 5.3 turbo swap, i have alot of questions if anyone can lend a knowlable hand id appreciate it, i know what i need and how i want to build the motor, i have transmission questions, thanks guys !
97 volvo v90 wagon. 405 ci cnc cathedral port heads, ls9 cam, tcs 10 inch convertor, 4 l80e, ls6 intake, 220 moran injectors, 80 mm turbo (upfront) off 13/4 stainless headers, 5 inch exhaust to 4 inch going back, 4 inch fmic, gen 7 dfi, 9 inch with 3.25 gears. e85
super sleeper
super sleeper
Staging Lane
Joined: Feb 2010
Posts: 54
Likes: 0
'63 Riviera 5.3/4L60 swap. Here's my '63 Riviera, with a '65 grill and concealed headlamps. The engine trans is a 5.3 Vortec with a 4L60. The truck intake won't clear the hood on initial trial, so I'll probably swap for an LS on or aftermarket intake. Otherwise looks like it'll be a pretty easy fit.
I have a 68 mustang fastback on the burner
(back burner as they say) I picked up an 07 silverado ly6 with an6l90 tranny. planning on rotisserie, front mustang II, 9" rear/mini tub (prolly ladders n coils) oh yeah....and a turbo.
way green/new
to ls builds but doing homework as i can until i finish my 32 3 window then its game on!!!
(back burner as they say) I picked up an 07 silverado ly6 with an6l90 tranny. planning on rotisserie, front mustang II, 9" rear/mini tub (prolly ladders n coils) oh yeah....and a turbo. way green/new
to ls builds but doing homework as i can until i finish my 32 3 window then its game on!!! 
