Conversion folks please list your conversion in here
2) 2005 5.3 truck motor, conversion to rbc, modified harness from same, 1997 4L60e and 241c transfer case from a k1500
3) Link to pics will be added
L92 w/cam, etc. - 6L80E - 242AMG
http://www.rme4x4.com/showthread.php...-quot-GM-build
Last edited by jpndave; Dec 2, 2014 at 10:23 PM.
thanks
The Best V8 Stories One Small Block at Time
Swapping to '99 5.3 + 4l60e.
Still in the parts acquisition stage, but it shouldn't be too long (short block, intake manifold, and ecu already found)
Absolute minimum budget.
Any *useful/valid* advice is welcomed!
1992 Jeep Wrangler
6.0 truck now a 408
ax15
atlas transfercase
dana 60 and 14 bolt
5.38 gears locked on both ends
coiled and linked
will post some pics this weekend
1992 Wrangler
4.8 truck motor shopping turbos now
4l80e and 241 transfer case
10.5 sterling rear dana 60 front
Iron Block LS3 Build / Beefed 4L60e, Vigilante 3600, 3:73's
In Depth Build can be seen here: http://www.digitalcorvettes.com/foru...d.php?t=210313
2000 5.3 LM7 DBC with 4l60e
Been sitting for 30 years..
Getting a disc brake conversion and everything to make it safe and legal. The rest stays the same for a sleeper look.
getting ready to pull all orig 350/350 running gear and prepare for my winter spring project, any help or suggestions on what swap brackets headers crossmember and electrical is much appreciated.
First timer on doing this.


