sticking a ls1 and a 700r4 in a 1953 ****** aero ace

 

in the midst of converting my 88 formula to ls1 t56, gettin the trans this weekend motor, thunder racing cam, cnc P&P heads and more laying around but much more still needed!!

 

Hello, my name is Luke, I have a black 1992 BMW 318is with a 2001 Chevy LS1, T-56 6-speed and 3.91 rear gears. I hope the pics work.

 

My name is James and I'm just starting my conversion. I'm going to be installing a LQ4 out of a 2005 GMC Van into my 1972 Blazer w/ TH350 and N205. Here's some pics of the Blazer and engine.

 

check out the swap thread in my signature for a potential assload of help - you might also consider signing up for the 67-72chevypickups.com forum to find thousands of other guys who love your year of trucks.

good luck with the swap - if i can be of any help, let me know.

 

Thanks, I'm already on that board, though I don't post there very often. I'm sure I'll be bugging you with some questions pretty soon here.

 

Please just list your conversion projects here, and start up discussions in new threads.

ADMIN

 

LS2 Datsun 280Z!

 

67 pontiac tempest convertible frame off restoration and up grades 4 wheel disk coil overs etc...

engine is a ls1, a4, radiator,computer,condensor,electric fans,... from 2000 ss camaro

quite a few modifications to car to make this work right including notching cross member, engine mounts from an after market supplier, transmision cross memeber from aftermarket supplier, slight changes to firewall, enlarged transmission tunnel...

 

1996 BMW Z3

 

1967 gto ls1, 228 cam, ls6 intake , stock manifolds ,6 speed, 411 gears 12.4@112mph and a 1.9 60 foot car weighs 3,520 with a full tank of gas and lots of dynamat,without me.

 

ls1 and a t56 in a 90 miata

getting parts and a plan together

 

i have a 94 lt1 6 speed camaro and just got a 2002 ls1 6 speed. what mods do i need to do to to get the ls1 harness to work with the lt1 chassis and dash harness. any info would be great. does any one know where to get wire scematics for both

 

The LS364/440 engine has been delivered. The Shell Valley Cobra chassis with body will be delivered the first of 2007. It consists of Ford Mustang style front suspension and Ford 9in. rear end all with coil-over-shock components.
Noteworthy: 1) There is no manual for this engine
2) GM has no tech hotline for support
3) All technical info is supplied by the older LS1 engine
publications [this is not the same engine]
4) I emailed GM and they referred me to a list of CHEVY
performance dealers for help. They can only quote the
Performance Parts catalog -which is only a commercial
to sell the engine.
I am currently working on the accessory drive for this engine and am awaiting delivery of 98 Camaro Z28 components to install the alternator etc. The dealer didn't know what was correct so I threw a mental dart and hope I am right as they have a no refund policy.
Anyone out there with info on this installation ?????
smith19142@netzero.net

 

89 toyota truck ls1,t56,umi race harness and 30 inches of wheel travel in the rear and 20inches in the front its full tube off road race truck

 

Guess I never listed my swap.. here is my project on CarDomain..

71 Chevelle/Malibu with a 99 LS1 and Viper T56, ground up restoration.

http://www.cardomain.com/ride/2353903

 

I am just getting started on this project. I have the engine and trans sitting there. I am hoping to have the beastly 229 V6 out by end of week. The goal is to finish gutting the car and send out for media blasting of the under-body and frame by Christmas. Then start working on fitting in the new motor and trans. I am just starting to gather the parts necessary for the swap. I will start taking pictures.

 

Haven't posted much but I need to say thanks for all the help over the years.

The 79 Camaro has a 2001 LS1 4L603 and the Wrangler has a 2001 4.8.

Both are great swaps.

Jim B.

 

1953 ****** aero ace 2 door sedan drop'd on a 98 s10 frame chunking in a ls1 backed by a 4l60e ...what can i say i'm getting older and i need p/s p/b ac and heated seats

 

Just picked up a damaged 2001 Z28, LS1, T56, going to drop a 69 Camaro body shell on it. pics at www.musclecarmetal.com/69Camaro.asp.