turbo chevelle gettin there!
#1
72 Chevelle / 6.0L / 4L80E / pt76
I've been doing alot of ing for a while and figured it was time to show what I've been working on. The setup description should be in my sig but here are a few pics:
The piping is kinda close to the alternator so heat may be an issue but I'll probably thermal coat or wrap to help this out. It's just tacked up for now, need to find someone to tig weld everything so it looks nice (my welding skills suck but getting better). Need to add wastegate, intercooler and piping and a few (many) other things and hopefully well be running in a few months.
The piping is kinda close to the alternator so heat may be an issue but I'll probably thermal coat or wrap to help this out. It's just tacked up for now, need to find someone to tig weld everything so it looks nice (my welding skills suck but getting better). Need to add wastegate, intercooler and piping and a few (many) other things and hopefully well be running in a few months.
Last edited by 350SS; 06-25-2016 at 10:51 AM.
#7
Turbo Chevelle........
I think it looks like a really nice setup. You say your welding skills are lacking, well I think your fab skills look great. Good welding = practice, practice, practice, and more practice. Good Luck!
Trending Topics
#8
Did you bend the exhaust pipe yourself or did you buy the bends if you did where did you pick them up at? BTW it looks pretty good you'll have to post some more pics when you get it all welded together.
#13
Launching!
iTrader: (2)
Join Date: Oct 2002
Location: Indy, IN
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
Looks awesome so far!! Where did you get that FLEX COUPLER Thingy-ma-bob-dealy thats coming off the passenger side ? That combo oughta really rock out !
Makes me wish I was closer on my truck.
Makes me wish I was closer on my truck.
#17
I thought I was alone
This is really weird Guys I'm doing the same thing with my 70 chevelle. I'm like TT402LS1 I'm not as far because I'm going from the ground up coating the frame knew suspension parts monte carlo front disc brakes. I do have a question thoght how did you mount your engine I looking for some Ideas. However I didn't think about turboing mine. How much did your turbo setup cost you, I might try that now.
#20
The bends and the flex section are from stainlessworks.net. They are all 304 stainless .065" thickness (16 ga?). The manifolds are the stock 6.0 manifolds flipped forward. Plug access is still pretty good, but I have to figure out how I'm going to route the plug wires. Not sure on the cost of the system, I think I've got about 1800 into the whole turbo setup (turbo, hot side piping, intercooler, wastegate, bov...). I taked about the swap a little in this post: http://www.pacificp.com/forum/viewtopic.php?t=2121 . Let me know if you want more details. Thanks for the compliments!
Last edited by 350SS; 02-20-2006 at 02:21 AM.