bmf5150

What's the part number?

tsnow678

iTrader: (3)

LMAO not for me it aint!!! Its big around as a beer can! Oh you were talking car talk. I am not certain. They make different designs I am sure. Just go to Summit Racing and type in the search bar " seals it grommet" and it will come up. You may even see if "seals it" has a website for further information.

bmf5150

Lol,ok thanks!!

Steve68

iTrader: (23)

oh boy,

Steve68

iTrader: (23)

Not much happening, cut the subframe for the A/C compressor,and welded in a pocket, been finishing parts on the motor, pretty much buttoned that all up, cutting and trimming the metal for the mini tub close out panels, little work here and there,

been trimming trees too, yee ha!!!

tsnow678

iTrader: (3)

You have any pics of the crossmember before and after?

bmf5150

That would be cool

Steve68

iTrader: (23)

I will have some of the "after" soon,

Steve68

iTrader: (23)

Well here's a couple of pics of recent activities, the first are a couple of the rebent steam tube and the shaved intake, underneath,

Steve68

iTrader: (23)

Alternative intake shot!!!



this is actually the intake for the 5.3 that I want to put in the Nova with a ATI S/C on it!

Steve68

iTrader: (23)

Accessory build up pics, Notice the Vintage Air brackets, waiting for parts is the story of my life!!!







Basically all assembled, it all fits, this was all mocked up on the bad 5.7 earlier, but I need a balancer, any ideas???? what kind??

Steve68

iTrader: (23)

I don't know how good this pic is subframe before,



and after, not really finished but I'm working on it,



This picture sucks, it's really washed out, I'll be grinding on this later and get a better shot,

Steve68

iTrader: (23)

And this was todays purchase, a AGR 12.7, steering box, it's 2 3/4 turns lock to lock, along with the Turn One pump and everything should be great! it a little soiled looks like someone spilled brake fluid all over it, time to clean,

I was getting ready to pull the plug and order a aftermarket subframe but I'm going to save the money for other stuff,

bmf5150

Nice!!!

tsnow678

iTrader: (3)

Notch looks good. Did you fab it up yourself or did you get the kit?
Your moving right along. Great work as usual. The Victor looks right at home.
Did you see Futureusers balancer? Its an under drive unit. I just bought a stock LS1 Fbody unit brand new from the dealer for $65.

Steve68

iTrader: (23)

No, I bought the BMR or ? kit, it was easier, I'm at a time vs money type of thing, some stuff I'll fab, but if it equals time vs money, I'll usually buy what I need, if it's within reason,

I want to get rid of the BBC in the Nova, the intake was a deal, and one of the mags did a junkyard 5.3 with the S/C, I want to follow suit,

I'll have to check out the balancer, thats all I need to finish up the accessories, small stuff right now, but I'm forging ahead,

ready for all you guys to turn the key and tell me how much fun your having driving your cars!!!!

Irish350

iTrader: (14)

i got a summit harmonic balancer, really impressed with the quality of it (pics in the ta thread)

Steve68

iTrader: (23)

I'll look into it, thanks

March supposedly makes a nice UDP, ATI are expensive,

Steve68

iTrader: (23)

Anybody know if the injectors can be cleaned out of the rail, or do they have to be in, I'll call my buddy tomorrow, just checking mine are nasty,

tsnow678

iTrader: (3)

I know you can send them off to have them cleaned and flowed so I assume yes they can be cleaned off of the rails. There is a sponsor on here that does it for a fee but I am not sure of who they are. I am sure it will come up in a search.