99 vette regulator/filter not working?
Thread Starter
Staging Lane
Joined: Sep 2004
Posts: 59
Likes: 0
From: arlington, wash
99 vette regulator/filter not working? went to start the car today and we werent getting any fuel to the rail. we went through entire system and found that we were getting pressure into the regulator/filter but no fuel would go through the outlet into the dorman hardline. we pulled the regulator back out and with the air compressor pushed 100psi and that wouldnt even make it through. faulty regulator? fuel pump was getting 11volts.
Originally Posted by Slo_240sx
Lines crossed.
likely.... line coming off the side of the filter is the inlet from the tank, the one in the middle pointing the same direction is return.
yea well good ol street and performance dosent help by having a widely distributed picture labeling it incorrectly. another reason not to buy anything from those billet idiots.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Easy, using Russell Q/D's to AN -6 on both Inlet and Return. Laying on my back, Rear Diff in the way, Exhause pipes in the way, tight area to work with, not enought light...Since the Inlet and return are both AN -6, it was easy to swap. Lucky I saw that there was no pressure on the fuel rail gauge and at that point I new I had something wrong.
