getting pcm reprogrammed...
getting pcm reprogrammed... so...after seaching thru some threads on this forums and others...along with speartech website....these are my list to be done...
-disabling vats
-disabling all unnecessary emissions equipment
-lowering the fan turn on temp
-raise rev limiter
-change rear end ratio to match my rear end
-remove speed governor
-any other performance enhancement
car will only have intake/header/exhaust...
am i missing anything else??? and how much should i expect to pay a local shop to do this???
-disabling vats
-disabling all unnecessary emissions equipment
-lowering the fan turn on temp
-raise rev limiter
-change rear end ratio to match my rear end
-remove speed governor
-any other performance enhancement
car will only have intake/header/exhaust...
am i missing anything else??? and how much should i expect to pay a local shop to do this???
Trending Topics
Joined: Sep 2004
Posts: 3,148
Likes: 12
From: Downers Grove, IL
The computer needs to know both your rear end ratio and your tire size so that it can calculate your road speed. If you change tire diameter you effectively change your gear ratio, so the computer needs both variables to calculate speed.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Joined: Sep 2004
Posts: 3,148
Likes: 12
From: Downers Grove, IL
Originally Posted by ace68
TM is used in the M6 also so you should have them not remove it but raise the limits.
Originally Posted by G-Body
Wow, I didn`t know that. How does it work with a 6spd? does it pull out advance when you push in the clutch or at a pre-programmed RPM?
ok...i'm stoopid here...are u being sarcastic or seriously asking??? cuz i don't fully get the concept torque management...first time i've heard of such technology...
Joined: Sep 2004
Posts: 3,148
Likes: 12
From: Downers Grove, IL
Originally Posted by Yellowbrother
ok...i'm stoopid here...are u being sarcastic or seriously asking??? cuz i don't fully get the concept torque management...first time i've heard of such technology...
Originally Posted by Yellowbrother
so...after seaching thru some threads on this forums and others...along with speartech website....these are my list to be done...
-disabling vats
-disabling all unnecessary emissions equipment
-lowering the fan turn on temp
-raise rev limiter
-change rear end ratio to match my rear end
-remove speed governor
-any other performance enhancement
car will only have intake/header/exhaust...
am i missing anything else??? and how much should i expect to pay a local shop to do this???
-disabling vats
-disabling all unnecessary emissions equipment
-lowering the fan turn on temp
-raise rev limiter
-change rear end ratio to match my rear end
-remove speed governor
-any other performance enhancement
car will only have intake/header/exhaust...
am i missing anything else??? and how much should i expect to pay a local shop to do this???
Originally Posted by vanilla89
i sent mine to pcm4less and he hooked it up $265
i talked to hpe here in houston and they say they'll proramming it for partial cost of full tuning (dyno and programming) and i can pay the rest when i bring it back to dyno...they say their package ish 400...
