sharp1

putting a 6.0 ls1 into a 73 camaro, does anybody know where to get engine mounts and anywhere i can get headers. thanks for the help

Samba242

Probably get better results posting this in the Hybrids section on this board.... folks there have put LS motors into just about everything.....

orangeapeel

iTrader: (18)

I would contact Energy Suspension. They do lots of conversion sets.

barnat

iTrader: (59)

hey man, try aplace calledstreet n performance wep www.hotrodlane.cc they proply got everything you need down to the custem oil pan that youl nneed. barnat

sharp1

cool, thanks for the info so far

SHINER

iTrader: (18)

moving to the hybrid section to get you some more feedback!

bczee

iTrader: (12)

Along with S&P, You can also try t56kit.com and BRPhotrod.com, Hooker also makes the Engine Adpater plates and headers.

Not many choices on Headers.. Hookers and Custom built are about it.

Stu Cool

iTrader: (13)

Check out the Stickys at the top of the forum. Most of the questions you will might come up with have probably been asked and answered. Aslo try a search on Gen II swaps.

That's a great swap

Pat

stealth71

iTrader: (15)

We need a check the sticky smiley.

sharp1

lots of helpful info in stickey.

joelvette

iTrader: (11)

i used the brp setup without having to modify the oil pan. the closest fit i could find for headers was 02 camaro pacesetters. i've heard hooker makes a header andd mount combo, dont know anything about it though. more info over on nastyz28.com and pro-touring.com, but this sight has got the most info. joel

ggriffin59

iTrader: (7)

These are the adapter plates I'm using, but have not done a test fit yet. I'm told that these work without modifying the oilpan and you will have to notch the frame for the LS1 a/c compressor on the lower right like most of the replies above suggest.

http://www.carshopinc.com/
LS1GM Click to enlarge
LS1GM Click to enlarge

LS1 LS6 CONVERSION MOTOR MOUNTS ADAPTER PLATES
CAR SHOP LS1GM

Price: $39.95