Conversions & Swaps LSX Engines in Non-LSX Vehicles
Sponsored by:
Sponsored by:

Lets talk about the S&P modified oil pans for 1st gens...

Thread Tools
 
Search this Thread
 
Old 10-02-2008, 10:33 AM
  #21  
11 Second Club
iTrader: (17)
 
ryanvv355's Avatar
 
Join Date: Mar 2007
Location: Hudsonville, MI
Posts: 756
Likes: 0
Received 1 Like on 1 Post

Default

heres my issue with a modified pan, it's capacity. The stock F-bod pan is 5 quarts? cut it down to 4.5ish with the modification, that does not sit well with me. For an extra $100 or so dollars I would opt for the Autokraft/Moroso/Milodon oil pan that is 7 quarts.

Champ pans is the producer of the Autokraft pan, I got mine shipped to my door for $380.
Old 10-02-2008, 11:21 AM
  #22  
Launching!
iTrader: (16)
 
12thstreetjunkman's Avatar
 
Join Date: Nov 2004
Posts: 225
Likes: 0
Received 0 Likes on 0 Posts

Default

Thought I would post a pic or to of what mine looked like

Old 10-02-2008, 12:50 PM
  #23  
Launching!
 
Teetoe_Jones's Avatar
 
Join Date: Aug 2002
Location: Los Angeles, CA
Posts: 242
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 1970-Cloned
I think there is something to be said about hacking stuff and aftermarket products in general. Never as good as the factory stuff.

.

If it makes you feel any better we worked with GM to design our road race oil pan. They liked it so much they use all our stuff(ATS) on their own project cars. There was quite a bit of room for improvement over the F body factory pan.

Tyler
Old 10-02-2008, 02:23 PM
  #24  
TECH Senior Member
iTrader: (6)
 
WILWAXU's Avatar
 
Join Date: Nov 2001
Location: League City, TX
Posts: 14,378
Likes: 0
Received 1 Like on 1 Post

Default

Originally Posted by 1970-Cloned
Is there anyone else that makes a pan that is similar to this?
ATS (Teetoe Jones) makes a simular pan that uses a remote oil filter setup.
Old 10-02-2008, 10:03 PM
  #25  
TECH Fanatic
iTrader: (23)
 
Steve68's Avatar
 
Join Date: Jul 2005
Location: Orl Fl
Posts: 1,489
Received 6 Likes on 6 Posts

Default

^^^^^^^^^^^^^^^^ the post above yours, check it!
Old 01-16-2011, 05:05 PM
  #26  
TECH Fanatic
 
bmf5150's Avatar
 
Join Date: Nov 2010
Posts: 1,679
Likes: 0
Received 0 Likes on 0 Posts
Default

So are s&p pan without a baffle bad ??
Old 01-16-2011, 05:40 PM
  #27  
TECH Fanatic
 
bmf5150's Avatar
 
Join Date: Nov 2010
Posts: 1,679
Likes: 0
Received 0 Likes on 0 Posts
Default

I'm trying to find a baffle for my pan!
Old 01-17-2011, 07:01 AM
  #28  
On The Tree
iTrader: (1)
 
98SuperchargedLs1's Avatar
 
Join Date: Jul 2006
Posts: 158
Likes: 0
Received 0 Likes on 0 Posts

Default

i used a stock f-body pan and it was modified around the pickup tube and the frame so nothing was comprimised it basically a stock pan with it modified alittle.. it didnt need alot like some people need



Quick Reply: Lets talk about the S&P modified oil pans for 1st gens...



All times are GMT -5. The time now is 08:06 PM.