LS1 into LT1 Fbody Help
I'll have to check on the style I got. I'm not for sure what it is. It's been awhile. Yeah I just cut the plastic lines. I can't think what the connectors are called They are gold with ridges on them. I just tephloned the connectors stuck one end on one side and the other end the otherside and clamped them down. I'm from Connersville, I'm over here on the Ohio and Indiana border. I can get you some pics but it will be prob. end of the week or so. My car is stored for the winter. I just bought a 99' Z28 camaro wrecked in the quarter and rear. I am going to part it out. I am supposed to get the car delivered tom. at my house , but with the weather the way it is,it might be end of the week. But I should have all the stuff for you to convert it over, even the fuel pump.
I'm not for sure if they are diff. or not. I'll look into it a little more and find out. Well a couple of things we need to find out is on mine. I popped the top of the fuel pump module to get the pump out to switch them and then I siliconed it back with black urethane that you put windshields in with. If you didn't want to do that we need to find of if the LS1 fuel pump module will fit into the LT1 style tank with out switching tanks.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
TECH Resident
iTrader: (12)
Joined: Jul 2004
Posts: 987
Likes: 1
From: Georgetown, IL 61846-1105
How many miles? You prob wont wanna just get rid of the Hyd setup, Bellhousing, Front Cover, and Input shaft would ya? I could give you my LT1 Hyd setup, Bellhousing, Front Cover, and Input Shaft so you would have a LT1 T56 to sell after I buy the LS1 parts off it tho huh?
I'll keep my eye out for ya 
Originally Posted by daniel6718
will the lt1 rack and knuckle fot with ls1 headers ect? and will it fit onto the ls1 k member correctly?
