Nissan 240sx speedo
#1
Staging Lane
Thread Starter
Join Date: Dec 2001
Location: crystal lake, IL
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
In the final stages of a LS1 S14 swap. Trying to make the speedo work.
I've got the Dakota digital signal conversion box that Hinson sells. Called them 3 times, no directions, promised to email.......
The Dakota box has instructions to hook up a single signal wire.
The Nissan S14 has 2 wires.
I searched couldn't find it.
Surely someone here has done it already?
Thanks
I've got the Dakota digital signal conversion box that Hinson sells. Called them 3 times, no directions, promised to email.......
The Dakota box has instructions to hook up a single signal wire.
The Nissan S14 has 2 wires.
I searched couldn't find it.
Surely someone here has done it already?
Thanks
#2
TECH Apprentice
Join Date: Aug 2006
Location: Mobile AL.
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i dunno about the wires but s/1 here can help you. but this is what i think im going with.scan gauge . just maybe s/thing to look at.
#3
TECH Enthusiast
iTrader: (17)
Join Date: Sep 2005
Location: Detroit, MI - Camp Pendleton, CA
Posts: 619
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
He can only use it if its 96 or newer. My speedo doesnt work either but I'm sure the DD will work. My tach work but jumps just a tad bit coming from 800RPM. Odd.
#4
TECH Apprentice
Join Date: Aug 2006
Location: Mobile AL.
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
he can use that scaner on any ls1. no matter if its in a model-T. scan goes to the engine pc. nothing to do with the car. and ls1's are 98 and up (there is a 97 too i think, cant remember).
and the DD converter is $80. this gives you some more gauges for $170. and you cant ask for a easier install. plug it up to the obdII plug and done. some things will not work im sure like the fuel read outs. due to sensors in the gas tank not being there.
some other gauge read outs...
* Fuel Economy
* Fuel Rate
* Battery Voltage
* Coolant Temperature
* Intake Air Temperature
* Engine Speed (RPM)
* Vehicle speed (MPH)
* Manifold Pressure (not available on some vehicles)
* Engine Load
* Throttle Position
* Ignition Timing
* Open/Closed Loop
and the DD converter is $80. this gives you some more gauges for $170. and you cant ask for a easier install. plug it up to the obdII plug and done. some things will not work im sure like the fuel read outs. due to sensors in the gas tank not being there.
some other gauge read outs...
* Fuel Economy
* Fuel Rate
* Battery Voltage
* Coolant Temperature
* Intake Air Temperature
* Engine Speed (RPM)
* Vehicle speed (MPH)
* Manifold Pressure (not available on some vehicles)
* Engine Load
* Throttle Position
* Ignition Timing
* Open/Closed Loop
Last edited by fouz65; 02-27-2007 at 10:18 PM.
#5
Staging Lane
Thread Starter
Join Date: Dec 2001
Location: crystal lake, IL
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks for the info. I've got eveything working except the speedo.
Don't want to add more gauges or spend more. Just want to get what I've got, which is supposed to work, working.
Thanks
Don't want to add more gauges or spend more. Just want to get what I've got, which is supposed to work, working.
Thanks
Trending Topics
#8
TECH Regular
iTrader: (1)
Join Date: Jun 2006
Location: Beaumont TX
Posts: 426
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
its nice but the display is to small for me. btw it doesnt really matter if the car is 96 or newer. you can wire the obd2 port off the ls1 harness, atleast thats what i did and my s14 is a 95.
#14
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
More proof the guy in the post above never sleeps. I actually registered so I could laugh at his post. We were able to get the speedo kinda working. Need to finish tying up the wires and see how it goes. PM me or jsworkstd if you are interested in instructions once we can confirm it works.
#15
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i've looked into this more... summit is going to be handling this box soon looks like it will be price at $60.
i searched it and there was really good install on a s10. i just googled it. i'll try to find it and post the link for it.
i searched it and there was really good install on a s10. i just googled it. i'll try to find it and post the link for it.
#17
Teching In
iTrader: (1)
Join Date: Aug 2006
Location: Tacoma, WA
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
power, tap into any ignition power
vss in= get it from the ecu vss output to tach
signal ground, just ground to the chassis
output= goes into the f3 plug
I forgot what jumpers need to be changed.
vss in= get it from the ecu vss output to tach
signal ground, just ground to the chassis
output= goes into the f3 plug
I forgot what jumpers need to be changed.
#18
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by ronald so
power, tap into any ignition power
vss in= get it from the ecu vss output to tach
signal ground, just ground to the chassis
output= goes into the f3 plug
I forgot what jumpers need to be changed.
vss in= get it from the ecu vss output to tach
signal ground, just ground to the chassis
output= goes into the f3 plug
I forgot what jumpers need to be changed.
#19
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
okay, i have it in output 1 right now. and it still blinks green the whole time. The ls1 is 4000ppm coming from the ecu. what is the 240s speedo ppm? i did the preset where is does 2x the 4000ppm signal. i thought the 240 was 8000ppm i guess not though since it doesn't work. i called dakota and they weren't much help just said use output one and program it. what did u guys do to set it up?