03 Mustang LS1 Conversion
If you have got 3.27s stock, I'd try them and see what you think. I've seen a couple of local turbo guys do bigger gears and usually regreat them in the end. The turbo needs to be loaded to work at its peak. Your car will make big power down low and a big gear will just blow through that power.
Thread Starter
Teching In
Joined: Mar 2007
Posts: 49
Likes: 0
From: Illinois
Ok...got the new axle on and the car is finally off the jack stands. Im going through the wheel well to mount the master cylinder closest to where its supposed to be. Theres a bit of cutting to be done but its the best route. I took pictures this morning but I have no clue what I did with my camera.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
On The Tree
Joined: Jul 2007
Posts: 113
Likes: 0
From: Largo, Fl
nice project man....I thought of doing the same thing about 6 months ago. I bought a 99GT with no motor......I ended pussin out and putting a 2004 explorer(aluminum) 4.6 motor back in the car. Glad to see someone has the right idea.
Thread Starter
Teching In
Joined: Mar 2007
Posts: 49
Likes: 0
From: Illinois
Ive got some bad news. Im going to Wyotech in Sacramento for High performance powertrain. Im this project is on hold for 9 months due to that fact. Anyhoo...Ill see you all again once its back on track. Thanks to everyone for their input and help with everything.
Chance
Chance
