Slow 346

iTrader: (33)

Has anyone tried this pan?
http://www.jegs.com/webapp/wcs/store...0002_623477_-1

Oscar Will

Milodon has some nice oil pans for LS motors now.......in fact, I supplied them with and engine for R & D on their pans and they promised me a freebie............I best call over there and find out where my pan is.....and my extra engine.

Lance-W

That pan requires a remote filter.......not that that's a bad thing but it's going to add to the overall cost.

TA219

iTrader: (1)

Lance is right, after you add on the filter and oil pickup the cost goes up quite a bit. The best overall deal i have found out there is from autokraft

http://www.autokraft.org/products/

stevieturbo

Is that autocraft steel or aluminium ?

Does the filter still mount in the stock location with it ?

xssive

iTrader: (123)

I have the moroso pan in my swap. Its a REALLY nice pan with trap doors

ryanvv355

iTrader: (17)

Will the swap oil pan thread die like last time?? I need owner info on the autokraft! I agree with the other guys about the Morosso, the pan price looks good at $220, but the pick up is $80 and then the remote oil filter setup. The autokraft is $430 but I think is a better setup.

SleeperSS

iTrader: (8)

If there are 3 people that need an autokraft pan we can get it for $409 shipped. Let me know if any of you are interested. Thanks

deeloc1

iTrader: (20)

Where exactly are you guys located??? I will be willing to pick one up if i can get it cheaper than the $409 that you are asking for shipped, if 3 people are interested! Looks very well constructed...does the oil filter fit in the factory location (driver side of pan)?? Thanks.

ryanvv355

iTrader: (17)

I am down for a group purchase, however, the Car Shop pan is still cheaper at $395 I might be doing that one.

stevieturbo

So can we get some pics or details of the different pans being discussed ?

TA219

iTrader: (1)

I am in, if we get the 2 others and this goes through then PM me because i dont always check back on threads.

stevieturbo

I would be interested in the Autokraft one..but need more info.

Id like pics of the oil filter location... and some pan measurements. I cant go any deeper than the stock 5.5" or so.
And depth at the front is quite important, as my steering rack sits there, and no doubt this pan will need cut.

And what is it made from ? Steel or Alu ?

Slow 346

iTrader: (33)

Id be in also on the GP. If we get more than 3 people can we get a better price??

chevy383man

iTrader: (2)

I have the autokraft on my LS1-S10 Blazer swap and its really a nice piece. It comes with the pickup, and the billet oil filter adapter to keep the filter in the stock location. here are some pictures.

ryanvv355

iTrader: (17)

Go ahead and count me in for the GP, lets get as many people as possible, I can wait.

72Elkytpi

iTrader: (47)

I need one too.

Roller406Bu

iTrader: (1)

I run the moroso in my malibu, fit my car with no mods...

jewce

I have the autokraft. Good piece. It clears the unisteer r&p by about 1.5" and clears the frame rail in a first gen f body. If you plan on doing any corner carving it's a must over the moroso as it has trap doors for cornering instead of motorized bowling.

DCx

iTrader: (12)

ordered mine on the GP today! sweet!!!!!!!!