LSX oil pans
thanks for the info phil, i just wanted to add
f-body oil pan gasket: 12558760 list price = $38.03 (napa wanted 52$ for theres)
and the list price for the f-body Dipstick = $15.07
and the list price for the f-body Dipstick tube = $9.84
f-body oil pan gasket: 12558760 list price = $38.03 (napa wanted 52$ for theres)
and the list price for the f-body Dipstick = $15.07
and the list price for the f-body Dipstick tube = $9.84
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Teching In
Joined: Feb 2008
Posts: 11
Likes: 0
pan with no dipstick I picked up the conversion kit from BRP for my 06 LS2 going into my 68 Firebird. I was about to change the pan today and I noticed the new pan has no provision for a dipstick. P/N on the pan is 12614827 ( I am not sure on the last number it is not really clear on the pan) Does any one know what I need to do? Do I need a different pan?
Thanks Al
Thanks Al
I picked up the conversion kit from BRP for my 06 LS2 going into my 68 Firebird. I was about to change the pan today and I noticed the new pan has no provision for a dipstick. P/N on the pan is 12614827 ( I am not sure on the last number it is not really clear on the pan) Does any one know what I need to do? Do I need a different pan?
Thanks Al
Thanks Al
Look on the passenger side of the block. Should be a hole there for the dipstick.
Andrew
This might be a challenge because of the variations in mounts and peoples tolerance for fitment. For example, there have been various pans used in GM A-bodies. Some have used the CTSV pan, F-body pan, Corvette pan, various aftermarket pans. They all fit, but some pans hang down past the crossmember, other pans require more engine setback, etc...
Andrew
Andrew
Banned
Joined: Jun 2005
Posts: 778
Likes: 0
Is this going to work on F-body? It looks close from page 1 of this thread.
Cadillac CTSv :
Capacity: 5.5 qts
Oil pan: 12577901
Oil pump pickup: 12577906
Windage tray: 12558268 (same as Truck "C/K)
Dipstick tube: ?
Dipstick: ?
O-ring for Oil pump pickup:?
Oil pan baffle: 12577904
Cadillac CTSv :
Capacity: 5.5 qts
Oil pan: 12577901
Oil pump pickup: 12577906
Windage tray: 12558268 (same as Truck "C/K)
Dipstick tube: ?
Dipstick: ?
O-ring for Oil pump pickup:?
Oil pan baffle: 12577904
Last edited by bluecamaroz28; May 2, 2008 at 04:52 AM.
