Chevelle throttle cable
#5
TECH Senior Member
iTrader: (12)
Lokar X4 like everyone else..
I just used an existing hole (it was square) that was in the firewall and inline with the pedal. I used a few larger washer on each side and bolted down the jam nut, ran the cable though the pedal eyelet.. then into the Lokar cable case and up to the Throttle Body and it was done.. (some cutting of the cable as needed) !
I just used an existing hole (it was square) that was in the firewall and inline with the pedal. I used a few larger washer on each side and bolted down the jam nut, ran the cable though the pedal eyelet.. then into the Lokar cable case and up to the Throttle Body and it was done.. (some cutting of the cable as needed) !
#6