the colorado is "officially finished" !
Very, very nice. As the other post said, looks like a factory install. Something GM should have offered.
Were you able to unload the stock drivetrain to recover some of cost, 'cause it looks like you started with a brand new truck? What AC compressor is that- looks different than others I've seen (factory Colorado).
You know it's a good swap when 99% of the public would think you bought the truck that way.
Good job. How's she run?
Were you able to unload the stock drivetrain to recover some of cost, 'cause it looks like you started with a brand new truck? What AC compressor is that- looks different than others I've seen (factory Colorado).
You know it's a good swap when 99% of the public would think you bought the truck that way.
Good job. How's she run?
Trending Topics
How hard was it to physically put the motor in? Did you have to do any notching/hammering of things to make clearance?
Did you use the current performance wiring harness? How was it to install to the exiting wiring block? What had to be modified to make it work?
What PCM are you using the LS2 or the Coly or both?
How was the trans tunnel with the new trans? Did you have to make a new crossmember? New driveshaft?
Any problems with frame flex that you can tell?
What about the radiator? Is it the stock Coly? Does it seem to be big enough to keep the LS motor cool?
Does it have A/C? and does it work?
Thanks!
Did you use the current performance wiring harness? How was it to install to the exiting wiring block? What had to be modified to make it work?
What PCM are you using the LS2 or the Coly or both?
How was the trans tunnel with the new trans? Did you have to make a new crossmember? New driveshaft?
Any problems with frame flex that you can tell?
What about the radiator? Is it the stock Coly? Does it seem to be big enough to keep the LS motor cool?
Does it have A/C? and does it work?
Thanks!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Sounds like my daughter asking me questions but they are all good stuff to know for future reference. If I can unload my s10 when it's done a colorado is next on the list.
How hard was it to physically put the motor in? Did you have to do any notching/hammering of things to make clearance?
Did you use the current performance wiring harness? How was it to install to the exiting wiring block? What had to be modified to make it work?
What PCM are you using the LS2 or the Coly or both?
How was the trans tunnel with the new trans? Did you have to make a new crossmember? New driveshaft?
Any problems with frame flex that you can tell?
What about the radiator? Is it the stock Coly? Does it seem to be big enough to keep the LS motor cool?
Does it have A/C? and does it work?
Thanks!
Did you use the current performance wiring harness? How was it to install to the exiting wiring block? What had to be modified to make it work?
What PCM are you using the LS2 or the Coly or both?
How was the trans tunnel with the new trans? Did you have to make a new crossmember? New driveshaft?
Any problems with frame flex that you can tell?
What about the radiator? Is it the stock Coly? Does it seem to be big enough to keep the LS motor cool?
Does it have A/C? and does it work?
Thanks!
Not one answer?
On The Tree
Joined: Jun 2005
Posts: 179
Likes: 0
From: Belleville, IL
How hard was it to physically put the motor in? Did you have to do any notching/hammering of things to make clearance?
Did you use the current performance wiring harness? How was it to install to the exiting wiring block? What had to be modified to make it work?
What PCM are you using the LS2 or the Coly or both?
How was the trans tunnel with the new trans? Did you have to make a new crossmember? New driveshaft?
Any problems with frame flex that you can tell?
What about the radiator? Is it the stock Coly? Does it seem to be big enough to keep the LS motor cool?
Does it have A/C? and does it work?
Thanks!
Did you use the current performance wiring harness? How was it to install to the exiting wiring block? What had to be modified to make it work?
What PCM are you using the LS2 or the Coly or both?
How was the trans tunnel with the new trans? Did you have to make a new crossmember? New driveshaft?
Any problems with frame flex that you can tell?
What about the radiator? Is it the stock Coly? Does it seem to be big enough to keep the LS motor cool?
Does it have A/C? and does it work?
Thanks!