Carshopinc.com starts a ls swap
#41
LS1TECH Sponsor
Thread Starter
iTrader: (5)
Join Date: Sep 2007
Location: Moline, ILLINOIS
Posts: 645
Likes: 0
Received 0 Likes
on
0 Posts
Well it looks as if it's finally time to set the engine in the beater!
I missed a few spots on the paint.... ohhhh well noting a few beers and some time can't fix
Here is the ls1 rail quick connect
I missed a few spots on the paint.... ohhhh well noting a few beers and some time can't fix
Here is the ls1 rail quick connect
#42
LS1Tech Sponsor
Join Date: Feb 2006
Location: Rockfield Kentucky
Posts: 1,170
Likes: 0
Received 0 Likes
on
0 Posts
What is that fuel line adapter that you are using?
I need one for the dyno
It nice to know that you can put something together rather than take em apart (Elec)
Nice job Car Shop!
Robin
I need one for the dyno
It nice to know that you can put something together rather than take em apart (Elec)
Nice job Car Shop!
Robin
#43
LS1TECH Sponsor
Thread Starter
iTrader: (5)
Join Date: Sep 2007
Location: Moline, ILLINOIS
Posts: 645
Likes: 0
Received 0 Likes
on
0 Posts
We have that fitting available at carshopinc.com
Here ya go!
It just did not feel the same without my sawzall!
http://carshop.carshopinc.com/produc...d/91200/640850
Here ya go!
It just did not feel the same without my sawzall!
http://carshop.carshopinc.com/produc...d/91200/640850
#49
LS1TECH Sponsor
Thread Starter
iTrader: (5)
Join Date: Sep 2007
Location: Moline, ILLINOIS
Posts: 645
Likes: 0
Received 0 Likes
on
0 Posts
Negative on the harness as of yet, they are the sanderson ls1 swap headers
http://carshop.carshopinc.com/produc...d/93549/CSLS1P
http://carshop.carshopinc.com/produc...d/93549/CSLS1P
#58
LS1Tech Sponsor
Join Date: Feb 2006
Location: Rockfield Kentucky
Posts: 1,170
Likes: 0
Received 0 Likes
on
0 Posts