Super Clean Fox LS swap
#41
12 Second Club
iTrader: (13)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
badass swap! looks clean as hell.
muscle is muscle, as long as it has 8 cylinders and more liters than a coke bottle, its fine by me.
dude, the project in your sig, the ls7 lotus would be rediculoussssssssssssss
muscle is muscle, as long as it has 8 cylinders and more liters than a coke bottle, its fine by me.
I'm a DOHC guy, can get 96-98 cobra motors or mk8 motors cheap, and pistons and rods and to the sky with the power. I'm aware with the junkyard stuff you can go fast, but without spray or forced induction they aren't to fast. I got my 5.3 very cheap and I think the LSX motors are just stronger. I dont dislike 5.0s, just like LSXs better.
#43
TECH Apprentice
Thread Starter
iTrader: (94)
Join Date: Oct 2005
Location: Huffman, Texas
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
BTW, I think I did a pretty good job considering I suck at welding and the only tools I have for metal work is a chop saw and grinder..
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang023.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang022.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang024.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang025.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang026.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang027.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang028.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang029.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang032.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang033.jpg)
#45
TECH Apprentice
Thread Starter
iTrader: (94)
Join Date: Oct 2005
Location: Huffman, Texas
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Worked on it some more yesterday. I got the cold piping done but I'm waiting on the silicone couplings to get here so I went to Lowe's and got some 2" plumbing couplings. I got started on the down pipe, I don't have anything to bend pipe so I have to take it to a shop to get it connected to my exhaust.
I'm still waiting on the radiator, as soon as it get here I'm going to get it fitted. Hopefully I can have it off to paint in the next 2 weeks.
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang035.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang036.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang037.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang038.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang039.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang040.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang041.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang042.jpg)
I'm still waiting on the radiator, as soon as it get here I'm going to get it fitted. Hopefully I can have it off to paint in the next 2 weeks.
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang035.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang036.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang037.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang038.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang039.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang040.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang041.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang042.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang043.jpg)
#46
TECH Fanatic
iTrader: (17)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Wow man... I cant say anything about your welding...but your metal fabbing seems to be pretty darn good! You did a nice job on that inner shock tower. Really clean looking. Nice stuff!
Sorry if I missed the info in the thread. Are you running solid motor mounts? Just wondering since things look pretty close between the piping the the shock tower.
And...Im really curious as to how you are going to fit a radiator in there. Not saying you cant...because I dont know what you have planned. Just saying I couldnt figure it out by the pics.
Good luck and I cant wait to see more progress on this! Especially some running/driving vids
J.
Sorry if I missed the info in the thread. Are you running solid motor mounts? Just wondering since things look pretty close between the piping the the shock tower.
And...Im really curious as to how you are going to fit a radiator in there. Not saying you cant...because I dont know what you have planned. Just saying I couldnt figure it out by the pics.
Good luck and I cant wait to see more progress on this! Especially some running/driving vids
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
J.
#47
TECH Apprentice
Thread Starter
iTrader: (94)
Join Date: Oct 2005
Location: Huffman, Texas
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Wow man... I cant say anything about your welding...but your metal fabbing seems to be pretty darn good! You did a nice job on that inner shock tower. Really clean looking. Nice stuff!
Sorry if I missed the info in the thread. Are you running solid motor mounts? Just wondering since things look pretty close between the piping the the shock tower.
And...Im really curious as to how you are going to fit a radiator in there. Not saying you cant...because I dont know what you have planned. Just saying I couldnt figure it out by the pics.
Good luck and I cant wait to see more progress on this! Especially some running/driving vids
J.
Sorry if I missed the info in the thread. Are you running solid motor mounts? Just wondering since things look pretty close between the piping the the shock tower.
And...Im really curious as to how you are going to fit a radiator in there. Not saying you cant...because I dont know what you have planned. Just saying I couldnt figure it out by the pics.
Good luck and I cant wait to see more progress on this! Especially some running/driving vids
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
J.
I'm running rubber mounts, I have some more to trim off the top side of the shock tower when I pull the motor back out.
I bought a F-body radiator and i'm going to try to lay it at a angle. I can cut the old lower radiator support and build one out of round tubing if needed. If that dont work then I'm going to take it to someone and have the re-route all the cold piping. I'm just working with the parts I got with the kit and a few parts I have laying around the shop. With my welding skills not being up to par I dont want to order the bends and have it looking like ****.
#49
TECH Regular
iTrader: (14)
Join Date: Jul 2005
Location: Spring, TX
Posts: 477
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
When I saw the first post in this thread I was like, yeah right another "I'm going to do this build" and then nothing happens. Looks like I was wrong!
Awesome build, good luck getting it all finished up.
Awesome build, good luck getting it all finished up.
![Thumb](https://ls1tech.com/forums/images/smilies2/thumb.gif)
#50
TECH Apprentice
Thread Starter
iTrader: (94)
Join Date: Oct 2005
Location: Huffman, Texas
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
When I started this build I had nothing other than a roller and a turbo kit. I have spent a lot of money in the past month buying everything to get the car were it is today.
If I would have wanted a BBC then it would have been done already but with out having LSX parts around everything has ordered. I'm still waiting on my oil pan, radiator, alternator, tensioner pulley and a few other parts to get everything done to were I can get it off to paint. I'm going to try to get it to the exhaust shop next week so that they can tie the hot side in with the exhaust.
#51
TECH Apprentice
Thread Starter
iTrader: (94)
Join Date: Oct 2005
Location: Huffman, Texas
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
**** i'm having fun with the whole project, If I did not have the car lift I would have said **** it and made it a heads and cam car
I have a bunch of friends that said they would help with the build and the only one that showed up was my brother... All he did was helped pull the front end off so that nothing got scratched. LOL
I have a bunch of friends that said they would help with the build and the only one that showed up was my brother... All he did was helped pull the front end off so that nothing got scratched. LOL
#52
TECH Apprentice
Thread Starter
iTrader: (94)
Join Date: Oct 2005
Location: Huffman, Texas
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I got a little bit of work done on the car yesterday. I have to get the car to a exhaust shop so that they can tie the down pipes into the exhaust. Ran the oil lines for the turbos and started on the fuel lines.
I also just got this new Camera so I wanted to post some pictures...![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang068.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang056.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang067.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang064.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang063.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang060.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang071.jpg)
I also just got this new Camera so I wanted to post some pictures...
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang068.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang056.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang067.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang064.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang063.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang060.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang071.jpg)
![](http://i98.photobucket.com/albums/l272/1BadChad/92%20Mustang/92Mustang050.jpg)
#56
On The Tree
Join Date: Jan 2008
Location: orlando fl
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
was this the one on racing junk for dirt cheap???if so very clean car was getting ready to come get it but got sold
![Sad](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_sad.gif)
#58
TECH Apprentice
Thread Starter
iTrader: (94)
Join Date: Oct 2005
Location: Huffman, Texas
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I ordered a LS1 F-body pan, the truck pan is hitting the steering rack. Some say the truck pan will work and it may but I have the motor sitting pretty low.
#60
TECH Apprentice
Thread Starter
iTrader: (94)
Join Date: Oct 2005
Location: Huffman, Texas
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks, I got a little bit of work done to it. The car is ready to go to the exhaust shop tomorrow to get the down pipes tied into the X pipe. I'm still waiting on the radiator, should be here in the next few days. If everything goes good it will be going to paint next week.