which color wires of Ign. Switch w/PIX
10-10-2008, 01:34 PM
#21
AWESOME>
THANKS thanks.....
THANKS thanks.....At Turn Signal Switch color wire:
white> brake ligt switch
green> right rear turn signal and brake light
yellow> left rear turn signal and brake light
purple> turn signal flasher
brown> emergency flasher
blue> right front turn signal
light blue> left rear turn signal
black> horn
lime-green>
tan>?
give me time, I'll try to find more.
white> brake ligt switch
green> right rear turn signal and brake light
yellow> left rear turn signal and brake light
purple> turn signal flasher
brown> emergency flasher
blue> right front turn signal
light blue> left rear turn signal
black> horn
lime-green>
tan>?
give me time, I'll try to find more.
white> windhield wiper power (although everything I've seen is yellow)
gray> windshield wiper delay/slow
green> windshield wiper mist
purple> windshield wiper high speed
pink> windshield wiper washer pump
black> cruise control resume/accel
blue> cruise control set/coast
gray> cruise control on/off
pink> power for cruise
gray> windshield wiper delay/slow
green> windshield wiper mist
purple> windshield wiper high speed
pink> windshield wiper washer pump
black> cruise control resume/accel
blue> cruise control set/coast
gray> cruise control on/off
pink> power for cruise
10-10-2008, 01:40 PM
#22
If no luck to use OEM Lock key switch, Wonder, can ignition switch to be modify, come with wires (white ACC., red BAT., pink IGN., purple ST.) to be fit on that steering column? Last edited by Jeff Smith; 10-10-2008 at 01:43 PM. Reason: edit
10-10-2008, 01:45 PM
#23
TECH Regular
iTrader: (2)
Join Date: Oct 2004
Location: Struble, IA
Posts: 443
Likes: 0
Received 0 Likes
on
0 Posts
I don't know if a universal one will fit in the column. A GM style key switch will probably use a stock connector anyway. You don't have any of the interior harness or something?
10-10-2008, 02:57 PM
#24
I don't know if a universal one will fit in the column. A GM style key switch will probably use a stock connector anyway. You don't have any of the interior harness or something?Yes, I install the fusebox/wires execpt that steering column wires and rear stoplight wires.
Last edited by Jeff Smith; 10-10-2008 at 02:58 PM. Reason: add
10-10-2008, 05:51 PM
#25
Launching!
iTrader: (14)
Join Date: Aug 2008
Location: Emporia KS
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
Here is where the stock igintion switch was located. It is connected to this rod . Try moving the key and see if the rod moves back and forth. The connector I showed you is the original that plugs into this switch. As far as the nutreal switch I have never seen anyone use one in a car. Only a clutch switch which you are also missing in the pix
10-10-2008, 05:56 PM
#26
Launching!
iTrader: (14)
Join Date: Aug 2008
Location: Emporia KS
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
I would try to locate an OEM switch. I sold the one I had. Then you could use it. If you need the plug that goes into it like I showed you, I would be willinng to part with mine.
10-12-2008, 11:09 AM
#29
Launching!
iTrader: (14)
Join Date: Aug 2008
Location: Emporia KS
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
I can find you a switch that will work. You can reuse the clutch switch if you need to. Just because you are not using the PCM does not mean you can not reuse the switch. I can draw you up the wiring if you need help.
10-12-2008, 01:19 PM
#32
Launching!
iTrader: (14)
Join Date: Aug 2008
Location: Emporia KS
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
Looking at http://www.acdelco.com/index.jsp. No show on that #... I ll check on GM part shop TRW..Thanks
PT289
10-16-2008, 05:47 PM
#33
Brakelamp/Brake Bracket Switch Connectors (pix) I look for connectors at brake bracket switch for hot wire from ignition switch and goes to stop lights.
which correct?
FINALLY, That stoplight works!!!!
Small box start with left>right:
1)
2)
Long box start with left>right:
1)
2)
3)
4)
which correct?
FINALLY, That stoplight works!!!!Small box start with left>right:
1)
2)
Long box start with left>right:
1)
2)
3)
4)
Last edited by Jeff Smith; 01-12-2009 at 04:57 AM.
11-06-2008, 07:19 AM
#36
Finally, I found that OEM switch ignition connector/rod. look at #25
I need switch ignition only.
what part # I need to buy for ignition switch? 1405B? I will go O'Reilly to look up that part #.
I need switch ignition only.
what part # I need to buy for ignition switch? 1405B? I will go O'Reilly to look up that part #.
Last edited by Jeff Smith; 11-06-2008 at 07:20 AM. Reason: add
