wow, this sucks...
wow, this sucks... 
So my S10 has been ready to start for almost a month now. Only thing I needed was a coil pack harness. Well I lost a couple of bids on ebay and couldnt find any on here. Well I finally found a set on here, I thought it was going to work, and I go to hook them up, and the connectors are wrong. So now Im back to square one. Either I find another set that will work, or I somehow buy 8 connectors and splice them on.
Sorry for the Rant, sometimes I get pissed.
You can get just the connectors here, http://currentperformance.com/Connectors/LS1_LS6.html if your pins will work, you're set.
Hmm, I was under the impression you couldnt buy these new...
Now just searching alittle, it seems there are different ones, according to the number on the coil, which I dont know off hand.
So far the part #'s I have are:
89017477
12582189
Now just searching alittle, it seems there are different ones, according to the number on the coil, which I dont know off hand.
So far the part #'s I have are:
89017477
12582189
take a picture of your coils and the plugs you have, I'll see if they are the same or different as what I have in the garage is. I'm pretty sure mine have part number stickers on them still.
Trending Topics
These were taken when I was asking if the F-body connectors were the same as Truck. The guy said they looked the same, but after I got them the F-body connector is bigger.
I will try to get some part # off them when I get home tonight.
I will try to get some part # off them when I get home tonight.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thursday is supposed to be D-day...I have a few people who are comming over to watch the first start up. I hope everything turns out. This has been like 2 years in the making for me.
In a somewhat related note, is it possible to cut off a 1/2" to 1" section off the front of the driveshaft, the part that slides into the transmission?
Thursday is supposed to be D-day...I have a few people who are comming over to watch the first start up. I hope everything turns out. This has been like 2 years in the making for me.
In a somewhat related note, is it possible to cut off a 1/2" to 1" section off the front of the driveshaft, the part that slides into the transmission?
In a somewhat related note, is it possible to cut off a 1/2" to 1" section off the front of the driveshaft, the part that slides into the transmission?
