HASTINGSRJ

iTrader: (18)

Anyone know where to get a convertible top cover? I am looking for the piece that the top switch goes in on the console....I stopped by my local GM dealer and they said they were discontinued.

JohnnyBs98WS6Rag

iTrader: (1)

gmpartsdirect.com has one shown for $9.63. However, the illustration shows only 1 switch hole, you are probably looking for a cover w/ 2 holes for TCS/ASR? I'd be bummed if you can't get that from a dealer, glad I picked up 2 a few years ago when I had a chance. You might be able to either fix the one you have or cut a 2nd hole in a new one. These parts are a POS design w/ flimzy "clips" on the back, very prone to breaking. I'd be tempted to try gluing some paper-clip type wire to the back to function as a clip, or to reinforce the broken clip (assuming you've been able to find that piece).

HASTINGSRJ

iTrader: (18)

Mine only has one opening for the top switch, however I drilled a hole in it for the line lock I glued it last night with some gorilla glue, we'll see if it holds. Do you by chance have a part #? Thanks for the info

HASTINGSRJ

iTrader: (18)

Damn, shipping and handeling are more than the part itself.....

HASTINGSRJ

iTrader: (18)

Heres the part number if anyone needs it 10411284*


Johnny, thanks for your help

HAWKVERT

If anyonw knows where I can get a new cover with both switch holes I would be very interested. It seems that they are discountinued, A few months ago I had my GM dealer do a national search and no one had them. I think the cost new when available was like $5 and some change. I missed an auction on Ebay that had one but it came with the complete console. They guy would sell me the cover seperate for $35 but I thought that was alittle steep. The whole console ended up selling for like $75....man did I miss that deal.

kbronSS

are u guys talking about the bezel???

99'CajunFirehawk157

iTrader: (57)

One of these emblem vendors on here needs to make them, they already make covers for them, now they need to make the entire bezel. The 2 holes are indeed no longer avaible. I got mine back when I could.

HASTINGSRJ

iTrader: (18)

Well the plate for the top switch is on national back order, and GM does not have a date when they will be availiable. I am curious if the TC plate for a trans am will fit a camaro. I went to the Pontiac dealer on Friday, he gave me a list of dealerships up and down the east coast who actually have that part in stock. He said he could order it for me, but he would have to mark it up $15.00-20.00. So intead he gave me the list Nice guy. I will let you all know how it works out.....hopefully I have a new plate this week....

kbronSS

hhmm...i just purchased mine a few weeks ago, and if i remember correctly there was a couple more left. gonna have to go and find out, and buy them.

HASTINGSRJ

iTrader: (18)

Well I called the dealer in Atlanta today, after a fax for a CC authorization they are sending me the part. They still have 2 in stock there.....I am thinking that I should have ordered 2 now...

kbronSS

do u have the part#?

HASTINGSRJ

iTrader: (18)

10411284

HASTINGSRJ

iTrader: (18)

New cover came in today, drilled it for my line lock and put it in

99'CajunFirehawk157

iTrader: (57)

UPDATE: Just a heads up for anyone who still needs these covers: I had p/n 10411284 on order with gmpartsdirect.com since this thread started and low and behold I got a shipment notification yesterday from them, since this is the only item I had on order it must be these covers, YMMV

HASTINGSRJ

iTrader: (18)

good deal, glad to hear it

HAWKVERT

Are you talking about the two hole bezel? P/N 10411284?

Joedashredder93

try Hawks Third Gen they have em. don't have a link right now though

99'CajunFirehawk157

iTrader: (57)

NOTICE: GM PN 10411284 is NOT the 2 hole bezel, the ones I just received today are ONE hole...if anyone needs ONE hole covers pm me.

HASTINGSRJ

iTrader: (18)

yeah, I believe they are different part numbers for the TA and camaro....