Ti exhaust mod?
Ti exhaust mod? whats the Ti exhaust mod... new to vettes saw a vid of a great sounding vette with it... sounds like people welded straight piping in place of the mufflers...
9 Second Club
Joined: Feb 2002
Posts: 2,252
Likes: 0
From: Tampa, FL
Ti exhaust, from what I understand is the the C5 Z06 came with Titanium exhaust which was lighter and nicer looking than the regular C5 exhaust. Many drivers will put the Z06 exhaust on the regular C5 and that is what I would think is the Ti exhaust mod.
Maybe someone can post some pics....
On The Tree
Joined: Dec 2007
Posts: 192
Likes: 0
From: north palm beach
there are a ton of threads on this. as said above. it is the ti exhaust from the c5 zo6 with a bypass pipe welded in to bypass 1/2 the exhaust from the muffler. it is what i have on my car and i love it!!!
On The Tree
Joined: Dec 2007
Posts: 192
Likes: 0
From: north palm beach
have fun finding someone who can weld titanium and do it right. the guy i used was good but he had to build a box to enclose the whole exhaust. he quoted me 100.00 but in the long run it cost him more than that in time and materials. but a man of his word stuck to the 100.00 quote.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo On The Tree
Joined: Dec 2007
Posts: 192
Likes: 0
From: north palm beach
dont call exhaust shops that the first mistake people make. call welding shops that advertise aviation welding. most aircrafts are made of titanium. its not like you in bfe. im sure you will be fine in vegas.
When I get my ZO6 this summer this is one of the first mods I plan on doing. The Ti cat-back flows good and is light. Just not loud enough. From what I have read the bypass pipes make it a nice bit louder. Then I'll do the Magnaflow OR upper pipes and X-pipe.
I have this done,,,and love it. its still somewhat docile putting around, but WOT is perfect. Of course mine is louder than most with a 416, long tubes, and no cats, but even on stock would sound best. Its not really cheap either. you need o get titanium pipe to weld in there, and the exhaust guy needs to be careful as welding Ti isnt like doing some crappy steel. my pipes were 60$ and it was 80$ for the labor.
