Stainless Steel Headers Made In USA for Under $800 Shipped @ Hinson Motorsports
#1
Stainless Steel Headers Made In USA for Under $800 Shipped @ Hinson Motorsports
Hinson Motrosports is proud to bring the C6 and C6 Z06 Corvette market the first set of MADE IN AMERICA, stainless steel, ceramic coated 1 7/8 headers for under $800.00 shipped to the lower 48 states. The headers are all mandrel bent with 1 7/8" primary tubes, 3/8" thick flanges, and 3" collectors. Also, all of our headers and x-pipes are ceramic coated to help reduce heat under the hood and the interior of the car. Our headers slide in to place without the need to loosen the engine mounts or the front crossmember. Installation time is short and can be done easily from below the car. Fitments currently available for the C6 wet and dry sump models with off road connections only.
*Expect to see gains of 25rwhp or more from the addition of these headers with a tune.
Price Includes
- Ceramic Coated Stainless Steel Headers
- Ceramic Coated Stainless Steel X-pipe (Select your vehicle)
- Stainless steel rear axle back connection pipes
- O2 Sensor Wire Extensions (x2) $50 value
- Clamps
Click Here For Prices & Purchasing
#3
#6
Trending Topics
#8
To bad these aren't emissions compliant or else I would have had a customer already ordering a set.
I'll keep these in mind for other cars I work on that don't have to worry about that.
I'll keep these in mind for other cars I work on that don't have to worry about that.
#9
In a month or so we will be offering catted versions as well. They are still in R&D at this time.
#10
Are they gong to be CARB legal or just make it so you pass the sniffer? In Colorado they have to be CARB legal with the numbers visible and they will check the numbers and fail you.
I just had to order some expensive *** cats so I don't have to worry about that.
I just had to order some expensive *** cats so I don't have to worry about that.
#11
I'm not sure yet because we have not made a decision in regards to this.
#12
Here you go guys/girls. Notice the cradle bolts were never loosened in the video in order to install these headers. They just slip right up into place.
C6 Header Install, Sound, & Burnout Video.
C6 Header Install, Sound, & Burnout Video.