ProCharger up and running!
Originally Posted by F-117HWK
Absolutely beautiful! How much was the entire install?... if you don't mind me asking
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
TECH Enthusiast
Joined: Apr 2005
Posts: 565
Likes: 0
From: Somewhere Between Mild Insanity and Complete Psychosis
-Installed by England Green
-Radiator Cover is from A&A Corvette Kit, i'm sure he would sell you one.
-Install costs (including extras and missing minor parts from the used kit) was $1700 in the end
-Total $$$ spent on the project was UNDER $6,000 for Install, Tune, Blower kit, ATI balancer, transmission cooler, gauges, etc.
-No idea on actual numbers. Andy at A&A used the 4.10 pulley in his base kit for a4 coupes, and saw around 7psi and 470-480rwhp. I have full exhaust so I should be close to 500rwhp. I didn't want to wait longer for a dyno session, I don't care about numbers, only what happens when I put my foot into it.
Will give it a real test run some night this week and post a thread with my impressions.
If any of you are thinking of a blower, England Green is a great guy to deal with and is running a special on the ECS Novi 2000 kit installed. You can find him easily in the c5 Forced Induction section at corvetteforum.
-Radiator Cover is from A&A Corvette Kit, i'm sure he would sell you one.
-Install costs (including extras and missing minor parts from the used kit) was $1700 in the end
-Total $$$ spent on the project was UNDER $6,000 for Install, Tune, Blower kit, ATI balancer, transmission cooler, gauges, etc.
-No idea on actual numbers. Andy at A&A used the 4.10 pulley in his base kit for a4 coupes, and saw around 7psi and 470-480rwhp. I have full exhaust so I should be close to 500rwhp. I didn't want to wait longer for a dyno session, I don't care about numbers, only what happens when I put my foot into it.
Will give it a real test run some night this week and post a thread with my impressions.
If any of you are thinking of a blower, England Green is a great guy to deal with and is running a special on the ECS Novi 2000 kit installed. You can find him easily in the c5 Forced Induction section at corvetteforum.
