Well will it go 10's wednesday at cecil???
Well will it go 10's wednesday at cecil??? Well the plan is to go to Cecil this wednesday at run grudge racing. The track wont be prepped very well but last wed. several people said the track was finally good again. Last time out I was able to click off 3 11.0x's This was a SUPER DUPER good weather at Atco with great track prep and able to cut 1.50-1.51 60fts rather easy. My best 60ft at cecil was 1.57 i believe.
Changes to the car since last out.
Added Roll bar 5pt added approx 50lbs
5pt harness
CNC'd center body pan
New ET streets
Bias plys front runners
New plugs TR55
New MSD wires
Fresh oil change LOL
New C6 tranny w/amsoil fluids
Raised the car up more, slightly more in the front to keep the cars weight planted towards the rear on shifts
MGW shifter-selling the C6Z06 shifter by the way
Putting a small can of Torco in aswell for good measure
So will this be it on wed to hit a 10.9x pass??? The car doesnt feel extra strong but we'll see i guess. I think due to weather/track prep/ extra weight I may be stuck at a 11.2's Just hopefully the 60ft and shifting gods will part the asphalt to let the car run a 10sec pass..... IF NOT I"M BOTTLING THE **** OUT OF IT
__________________
2000 TR FRC
444rwhp/385rwtq H/C/I
11.02@126.64mph-1.511 60ft
4.10's, textralia, TSP/PRC,Ported Fast 90/90LS2TB,M3 cam, Kooks LT's, SLP POYourneigbor edition catback, Chrome Z06/Weld draglites all around Faster than NICKOLBAG!
http://www.reidonly.net/banners/banner-fartpipe.jpg
Changes to the car since last out.
Added Roll bar 5pt added approx 50lbs
5pt harness
CNC'd center body pan
New ET streets
Bias plys front runners
New plugs TR55
New MSD wires
Fresh oil change LOL
New C6 tranny w/amsoil fluids
Raised the car up more, slightly more in the front to keep the cars weight planted towards the rear on shifts
MGW shifter-selling the C6Z06 shifter by the way
Putting a small can of Torco in aswell for good measure
So will this be it on wed to hit a 10.9x pass??? The car doesnt feel extra strong but we'll see i guess. I think due to weather/track prep/ extra weight I may be stuck at a 11.2's Just hopefully the 60ft and shifting gods will part the asphalt to let the car run a 10sec pass..... IF NOT I"M BOTTLING THE **** OUT OF IT
__________________
2000 TR FRC
444rwhp/385rwtq H/C/I
11.02@126.64mph-1.511 60ft
4.10's, textralia, TSP/PRC,Ported Fast 90/90LS2TB,M3 cam, Kooks LT's, SLP POYourneigbor edition catback, Chrome Z06/Weld draglites all around Faster than NICKOLBAG!
http://www.reidonly.net/banners/banner-fartpipe.jpg
Well the plan is to go to Cecil this wednesday at run grudge racing. The track wont be prepped very well but last wed. several people said the track was finally good again. Last time out I was able to click off 3 11.0x's This was a SUPER DUPER good weather at Atco with great track prep and able to cut 1.50-1.51 60fts rather easy. My best 60ft at cecil was 1.57 i believe.
Changes to the car since last out.
Added Roll bar 5pt added approx 50lbs
5pt harness
CNC'd center body pan
New ET streets
Bias plys front runners
New plugs TR55
New MSD wires
Fresh oil change LOL
New C6 tranny w/amsoil fluids
Raised the car up more, slightly more in the front to keep the cars weight planted towards the rear on shifts
MGW shifter-selling the C6Z06 shifter by the way
Putting a small can of Torco in aswell for good measure
So will this be it on wed to hit a 10.9x pass??? The car doesnt feel extra strong but we'll see i guess. I think due to weather/track prep/ extra weight I may be stuck at a 11.2's Just hopefully the 60ft and shifting gods will part the asphalt to let the car run a 10sec pass..... IF NOT I"M BOTTLING THE **** OUT OF IT
__________________
2000 TR FRC
444rwhp/385rwtq H/C/I
11.02@126.64mph-1.511 60ft
4.10's, textralia, TSP/PRC,Ported Fast 90/90LS2TB,M3 cam, Kooks LT's, SLP POYourneigbor edition catback, Chrome Z06/Weld draglites all around Faster than NICKOLBAG!
http://www.reidonly.net/banners/banner-fartpipe.jpg
Changes to the car since last out.
Added Roll bar 5pt added approx 50lbs
5pt harness
CNC'd center body pan
New ET streets
Bias plys front runners
New plugs TR55
New MSD wires
Fresh oil change LOL
New C6 tranny w/amsoil fluids
Raised the car up more, slightly more in the front to keep the cars weight planted towards the rear on shifts
MGW shifter-selling the C6Z06 shifter by the way
Putting a small can of Torco in aswell for good measure
So will this be it on wed to hit a 10.9x pass??? The car doesnt feel extra strong but we'll see i guess. I think due to weather/track prep/ extra weight I may be stuck at a 11.2's Just hopefully the 60ft and shifting gods will part the asphalt to let the car run a 10sec pass..... IF NOT I"M BOTTLING THE **** OUT OF IT
__________________
2000 TR FRC
444rwhp/385rwtq H/C/I
11.02@126.64mph-1.511 60ft
4.10's, textralia, TSP/PRC,Ported Fast 90/90LS2TB,M3 cam, Kooks LT's, SLP POYourneigbor edition catback, Chrome Z06/Weld draglites all around Faster than NICKOLBAG!
http://www.reidonly.net/banners/banner-fartpipe.jpg
hey man . good luck with your run... one question. you made 444rwh with that ms3 cam? cam only. ?
Trending Topics
TECH Senior Member
iTrader: (3)
Joined: Apr 2006
Posts: 6,524
Likes: 1
From: Western Burbs of Detroit
TECH Fanatic
Joined: Jun 2006
Posts: 1,220
Likes: 0
From: Nashville, TN
Good luck bro, I hope you hit it!!!!
