New N/A Best 9.59 @ 138
#21
I've been playing with the shift points and I've been shifting the 1-2 shift between 6700 and 6900 and the 2-3 shift right around 6500 according to the data logger.
I've tried shifting it lower but mph and ET suffer. For a hydraulic roller it's weird that she likes the higher rpm's and I've been thinking about putting in slightly steeper gears to take advantage of that. (3:73's in there now). Gonna get all the data together and talk to Neal Chance to see if there's anything with the converter that can be done.
Running 26 degrees of timing. Cam is Cartek custom grind.
I've tried shifting it lower but mph and ET suffer. For a hydraulic roller it's weird that she likes the higher rpm's and I've been thinking about putting in slightly steeper gears to take advantage of that. (3:73's in there now). Gonna get all the data together and talk to Neal Chance to see if there's anything with the converter that can be done.
Running 26 degrees of timing. Cam is Cartek custom grind.
Those 60' times have to hurt the next day.
#22
9 Second Club
Thread Starter
iTrader: (23)
Join Date: Nov 2003
Posts: 3,377
Likes: 0
Received 0 Likes
on
0 Posts
Now off the transbrake-that's another story, last time I tried that I think you were at the track, felt like a Donkey kicked me in the back and it hurt the rest of the night, she didn't even hook, haha.
#30
9 Second Club
Thread Starter
iTrader: (23)
Join Date: Nov 2003
Posts: 3,377
Likes: 0
Received 0 Likes
on
0 Posts
Thanks again, Mark