Cam only LS6 M6 in the 10's about time
#1
11 Second Club
Thread Starter
iTrader: (14)
Join Date: May 2007
Location: Aurora IL
Posts: 1,660
Likes: 0
Received 0 Likes
on
0 Posts
Cam only LS6 M6 in the 10's about time
Today i went out to US41 in I.N. I went there today to try and run a 10sec run.
And i met my goal of this year today.
And a big Thanx to Larry At Speed Inc For all the help on getting this car in the 10.xx's
60 foot ---1.48
330 foot---4.495
1/8th---6.973
1/8th mph----98.95
1000 foot---9.101
1/4--- 10.88
mph 126.81
and the Mods to the car are
Stock Ls6 long block
Chrs1313 ramair
fast toys 85mm lid
z06 maf
Vindicator 240/244 605/596 on a 112lsa
EWP
kooks 1-7/8's header kooks Y with 4in cutout and mufflex cat back
42# injectors
fast 90/90 setup
powerbond underdrive pulley
tick perf stage 2 M6 tex 0z700 clutch
2 step set at 6400rpm
3.5 moly drive shaft
Fab nine rear end with steel spool and 4.56 gears
strange shocks front and rear S/A Front set to 3 rears set to 6
28x10.5x15s M/T slicks
Umi LCA's
UMI T/Q arm Chas mount
Spohn drag bar
spohn phb
B/S street lites 15x10 rear 15x4.5 fronts
Had some good air today to waiting to see what the air was when i made my pass @ 18:15:30 Oh and the car has more left in it the 60 was weak and i think i can get more out of it but i will see.
Oh and title change please
Rob
And i met my goal of this year today.
And a big Thanx to Larry At Speed Inc For all the help on getting this car in the 10.xx's
60 foot ---1.48
330 foot---4.495
1/8th---6.973
1/8th mph----98.95
1000 foot---9.101
1/4--- 10.88
mph 126.81
and the Mods to the car are
Stock Ls6 long block
Chrs1313 ramair
fast toys 85mm lid
z06 maf
Vindicator 240/244 605/596 on a 112lsa
EWP
kooks 1-7/8's header kooks Y with 4in cutout and mufflex cat back
42# injectors
fast 90/90 setup
powerbond underdrive pulley
tick perf stage 2 M6 tex 0z700 clutch
2 step set at 6400rpm
3.5 moly drive shaft
Fab nine rear end with steel spool and 4.56 gears
strange shocks front and rear S/A Front set to 3 rears set to 6
28x10.5x15s M/T slicks
Umi LCA's
UMI T/Q arm Chas mount
Spohn drag bar
spohn phb
B/S street lites 15x10 rear 15x4.5 fronts
Had some good air today to waiting to see what the air was when i made my pass @ 18:15:30 Oh and the car has more left in it the 60 was weak and i think i can get more out of it but i will see.
Oh and title change please
Rob
Last edited by 98blueSScamaro; 10-15-2009 at 10:14 PM.
#2
Banned
iTrader: (22)
Join Date: Jan 2004
Location: Schaumburg,IL
Posts: 4,957
Likes: 0
Received 0 Likes
on
0 Posts
awesome! congrats Rob and I'm happy to see you finally get that #
I wish you guys could have grab the air Sat @ GLD..sucks they shut down.
see you the 25th and hope you can even better this NB
I wish you guys could have grab the air Sat @ GLD..sucks they shut down.
see you the 25th and hope you can even better this NB
Trending Topics
#15
see what happens when you start hanging out with me...just kidding all the props go to you and that awesome driving, nice powershifting...
i remember a little over a year ago when i put bus lengths on your car...not i have to steal the hit on the street...congrats bud...oh and that ram air adds 50hp+ haha
i remember a little over a year ago when i put bus lengths on your car...not i have to steal the hit on the street...congrats bud...oh and that ram air adds 50hp+ haha
#17
11 Second Club
Thread Starter
iTrader: (14)
Join Date: May 2007
Location: Aurora IL
Posts: 1,660
Likes: 0
Received 0 Likes
on
0 Posts
thanx bongva-camscam02(HAHA you know i been trying to get my cheater ls6 in the 10x for a bit know. Dam M6 junk) And Thanx chris and Elmer for the support and good times i am so happy.
Rob
Rob