Took the turbo 30th out
#1
12 Second Club
Thread Starter
iTrader: (16)
Join Date: Jul 2006
Location: buffalo new york
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Took the turbo 30th out
Finally got to the track with the new setup.
10.64 @ 134 1.52 60ft.
it's a forged 347 with a borg warner s475 making 670/633 on 11psi. 317 heads, LS6 cam, LS6 intake, Lunati valve springs, ported TB. twin 38mm tial gates with 10.7 springs. Built T56, Spec 3, Dana S60 w/ 3.73 on a 26x 11.5 x 16 ET street slick. Bilstein shocks with an Eibach pro kit and still a stock tq arm to boot.
Here's a vid of the run
http://www.youtube.com/watch?v=GChlmHIPgKA
10.64 @ 134 1.52 60ft.
it's a forged 347 with a borg warner s475 making 670/633 on 11psi. 317 heads, LS6 cam, LS6 intake, Lunati valve springs, ported TB. twin 38mm tial gates with 10.7 springs. Built T56, Spec 3, Dana S60 w/ 3.73 on a 26x 11.5 x 16 ET street slick. Bilstein shocks with an Eibach pro kit and still a stock tq arm to boot.
Here's a vid of the run
http://www.youtube.com/watch?v=GChlmHIPgKA
#3
12 Second Club
Pretty sure it will go lower 10s as it sits anyways that night he ran was pretty hot and humid.
#6
12 Second Club
Thread Starter
iTrader: (16)
Join Date: Jul 2006
Location: buffalo new york
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
except you went 9.48 i believe!! Lol. Yes I lose alot with the 6 speed but holy hell is this thing a blast. I plan on going to 15-16psi and trying for a 6 speed 9 second pass. Just having fun and enjoying her. I may move the tq arm off of the transmission and put some stock springs in the rear to get some weight transfer out of it.