Hey guys, I just picked up a 01 som z28 A4 for a steal.. Car is super clean and had a few mods and was curious if anyone has any 1/4 mile times using the hotcam and bolt ons.. I would love to report some times myself but will unfortunately not be able to get the car to the track for a while.. I know the cam gets a bad wrap, but I couldn't pass the car up for the price.. My setup is ls1 hotcam, hollowed convertors, weld in flowmaster, (stock manifolds/y- pipe for now) slp lid, 3.73s (stock convertor), and a flash tune from mad tuner.. Any imput on 1/4 times with similar setups or even dyno #s would be appreciated!!

 

You might want to check out some of the new tick cams on here.

 

with the ls6 intake and hot cam and cats out its got to be in the high to mid 12's somewhere with sticky tires.

 

I ran 11.60 at 117 mph with a m6. Car is light with 4.56 gears so not a good comparison but you can run good with a hotcam. It's no longer in the car now though.

 

Right combo and 11's are easy....w/o a hot cam. Finish your bolt-on with some kooks headers, throw the flowmaster in the trash, get you a fast 90/92,a dyno tune, a little weight reduction, a good converter and mid 11's should be doable.

 

hey guys, don't know if you had seen my other post, but I was able to sneak away to the track.. Car ran 12.71@112 with a 1.98 60ft, right off the street , after a 45 minute drive, 80 degree weather.. I was impressed with the mph, as I know that's good for low 12s! Ppl really seem to dog this cam, but with a proper exhaust/tune/stall I think the car would be a quick little street car... especially since I only have $4900 bux in it! (that includes the car)

 

I ran a 12.16 at 114mph N/A with 6 degrees timing pulled. [ hotcam/bolt-ons ]
Weather was about perfect that day, so everyone was running well.

 

nice !

 

what was the 1/8 mile et and mph

 

Nice times! Pretty impressed

 

I have a hot cam with supporting mods in sig. I'm working on my 60 ft right now. Best I can manage is a 2.1 60ft. 1/4 mile was 13.2 at 109 mph DA was over 3000 ft. Car is capable of 12's for sure. I love my hot cam!

 

Let me dig my slip back up so I can check my 1/8th stats.. Also what rpm are you guys shifting at?? I believe mine is programmed to 6200-6300 but honestly it seems like it falls out of powerband for a few hundred rpm.. It feels like it could use a 6500 1-2 shift and a 6400 2-3 shift... Thoughts!??

 

Nice, what's your da in Washington??

 

1/8 mile et 8.25

1/8 mile mph 86.97

 

 

That sucks pretty good by todays standards