1/8 mile vids of my car 7.34 and 7.42
#1
10 Second Club
Thread Starter
iTrader: (5)
Join Date: Apr 2003
Location: Okinawa, Japan
Posts: 1,220
Likes: 0
Received 0 Likes
on
0 Posts
1/8 mile vids of my car 7.34 and 7.42
went 7.34 at 95.9 and 7.42 at 96.1 let me know what u guys think, lil more gear and get that nut behind the wheel driving good and i should get close to 6's, this is with near no weight reduction and 390 gears on my HC car
http://slackercracker.com/hpt/upload...ds/kurt734.mpg
http://slackercracker.com/hpt/upload...buckvskurt.mpg
enjoy
http://slackercracker.com/hpt/upload...ds/kurt734.mpg
http://slackercracker.com/hpt/upload...buckvskurt.mpg
enjoy
#5
not on that pass, he ended up gettin a 7.27 at 97 on a 150 shot but i think his bottle was going sour....once he gets his 430s and tuned worked out it should fly.....i was considering doin 410s or 430s how do you like your 430s? are you makin it through the traps in 3rd on motor or have to shift to 4th in the 1/8 and what about the 1/4.....if so what wheel/tire combo you running, id like to run a 6.99 NA if possible
btw this is kurtomac on my brothers name
btw this is kurtomac on my brothers name
Trending Topics
#8
TECH Addict
iTrader: (3)
I have a 10 bolt so the 430's got all the bogg out of the car since I couldn't dump the clutch. I can't see a difference in track time after the 60ft mark between the 2 gears. I leave it in 3rd on n/a and it is turning around 7 at the end. I haven't got to run 1/4 yeh but pretty sure it will make it. Tires are M/T drag radials 275/50/15 on a 15x8 prostar. Oh and I saw Bucks post about the time on HPT Forums. Great job on your car man. If the weather holds I should be up at the rod run again. Later...
#10
10 Second Club
Thread Starter
iTrader: (5)
Join Date: Apr 2003
Location: Okinawa, Japan
Posts: 1,220
Likes: 0
Received 0 Likes
on
0 Posts
00SS thats crazy fast for 10 bolt and 430s i think im gonna do 410s and might bump my rev limiter up to 6900 or 7000....lookin forward to meetin you at the rod run this year...... my exhaust consists of Jet hot 1 3/4" LT headers Mufflex 3" ORP with 4"Flowmaster Collecter, 4-3 reducer and a cutout then it goes into a SLP dual dual catback for sanity of my ears
#12
TECH Junkie
iTrader: (2)
4.30's were a tenth quicker for me consistently over 4.10's. my best 1/th mile is 7.289 @95 mph . 1.61 60 ft. That may show you the 4.30 gears getting it moving from the 60 ft to the 1/8th mile with near Identical 60 ft times. and you have a little better mph and we shift somewhat about the same.