Here is the new proshifted tranny videos
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
as you can see, i still have some tunning to do on the launch, it did alot of spinning and some dead hooking, just got to get here all figured out with these new tires and things will go alot better. also these tires are powering through the brakes on the strange brakes, after the camera left i got it to start holding for a harder burnout by pumping the brakes hard then locking them like madman had told me.
hey brian, watch the videos and see if you have any suggestions, about halfway through it pulled a nice lil wheelie launch and had a decent 60 but it pulled the motor down a lil to much and killed my 330 times
if i ever get my foot back to working order ill got do a lil better and mess with the suspension some more.
p.s. this tranny kicks butt once i untrained myslef not to let off the gas, i did it half dozen times from 1-2 before i finally got to where i remembered not to do it, lmao
http://www.getonitracing.net/members...asses72905.wmv
hey brian, watch the videos and see if you have any suggestions, about halfway through it pulled a nice lil wheelie launch and had a decent 60 but it pulled the motor down a lil to much and killed my 330 times
if i ever get my foot back to working order ill got do a lil better and mess with the suspension some more.
p.s. this tranny kicks butt once i untrained myslef not to let off the gas, i did it half dozen times from 1-2 before i finally got to where i remembered not to do it, lmao
![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
http://www.getonitracing.net/members...asses72905.wmv
#5
Restricted User
iTrader: (9)
Join Date: Sep 2002
Location: Sierra Vista, AZ
Posts: 7,603
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Very nice runs, and begining of a long happy relationship b/w you and the new trans.
WTF is a proshifted trans, clutchless or what exactly? Its not legal in most series of street car racing is it, like LS1Tech or Summit Series?
WTF is a proshifted trans, clutchless or what exactly? Its not legal in most series of street car racing is it, like LS1Tech or Summit Series?
Trending Topics
#13
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by 1fastWS6
2 things....
1) I can't believe you don't have a line lock!
B) get a new camera man!
Looks like my wife was video'ing for you. LOL.
The tranny sounds like an auto though....NICE!
1) I can't believe you don't have a line lock!
B) get a new camera man!
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
The tranny sounds like an auto though....NICE!
2. not my cammera, lol but i do think i need to invest in one
![Sad](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_sad.gif)
#17
8 Second Club
iTrader: (3)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by SMOKIN01TA
1. got a line lock, thats not the problem, just that you have to mash the pis out the brakes before they will push all 8 pistons hard enought to hold the front tires. once i do that and engauge the lock it dont move a inch
2. not my cammera, lol but i do think i need to invest in one![Sad](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_sad.gif)
2. not my cammera, lol but i do think i need to invest in one
![Sad](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_sad.gif)
What brakes do you have? My Aerospace 4 piston calipers are similar in that you have to pump the brakes 1-2 times, then mash them to set the line lock. Otherwise it will roll slightly. Any problems getting the brakes to hit on the top end? Sometimes the master cylinder can be changed out to one that moves more fluid to cure your problem.
#19
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by 1fastWS6
What brakes do you have? My Aerospace 4 piston calipers are similar in that you have to pump the brakes 1-2 times, then mash them to set the line lock. Otherwise it will roll slightly. Any problems getting the brakes to hit on the top end? Sometimes the master cylinder can be changed out to one that moves more fluid to cure your problem.