Dad's Z/28
#22
Banned
Thread Starter
iTrader: (22)
Join Date: Jan 2004
Location: Schaumburg,IL
Posts: 4,957
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
We had another new best with my fathers car.
NA
1.56
11.63
116.5 mph
N20 175 shot...previous 150 shot
1.48
10.63
127.9 mph
had a best of 1.44 60ft.... stock rear and trans![Nod](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_nod.gif)
We are very happy concidering we had a 1-2 shift issue on the jug that caused some plug damage. I noticed it was down on the 2nd pass and most likely it had damaged plugs after the first pass being we had the same issue. I am sure the car had a little more in it with a full clean pass.
swapping on some heads this coming weekend and if our weather holds out track next weekend
I think if we can get a good track and air it will go 10.3's
NA
1.56
11.63
116.5 mph
N20 175 shot...previous 150 shot
1.48
10.63
127.9 mph
had a best of 1.44 60ft.... stock rear and trans
![Nod](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_nod.gif)
We are very happy concidering we had a 1-2 shift issue on the jug that caused some plug damage. I noticed it was down on the 2nd pass and most likely it had damaged plugs after the first pass being we had the same issue. I am sure the car had a little more in it with a full clean pass.
swapping on some heads this coming weekend and if our weather holds out track next weekend
I think if we can get a good track and air it will go 10.3's
![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
#24
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Congrats guys!! How are you getting the stock trans to live? Are you keeping some TM in the car, big cooler etc? Are the stock gears and not revving the **** out of it helping?
Very nice job!
Very nice job!
#25
Banned
Thread Starter
iTrader: (22)
Join Date: Jan 2004
Location: Schaumburg,IL
Posts: 4,957
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
we can't wait either for the heads ![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
stock trans
-keep fluids changed
-24,000 cooler
-fingers crossed![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
rearend is a stock
-3.23
-keep fluids changed
-fingers crossed every pass
We know at some point we will have to ring FLT for a trans. The rear makes a tad bit of noise on coast, but otherwise it's good. This is the 3rd season with 1.50 or better 60 ft times. I just delay the hit on N20 by 1-2 hundred RPM and make sure the chassis is loaded....IT WORKS
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
stock trans
-keep fluids changed
-24,000 cooler
-fingers crossed
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
rearend is a stock
-3.23
-keep fluids changed
-fingers crossed every pass
We know at some point we will have to ring FLT for a trans. The rear makes a tad bit of noise on coast, but otherwise it's good. This is the 3rd season with 1.50 or better 60 ft times. I just delay the hit on N20 by 1-2 hundred RPM and make sure the chassis is loaded....IT WORKS
![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
#27
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
we can't wait either for the heads ![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
stock trans
-keep fluids changed
-24,000 cooler
-fingers crossed![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
rearend is a stock
-3.23
-keep fluids changed
-fingers crossed every pass
We know at some point we will have to ring FLT for a trans. The rear makes a tad bit of noise on coast, but otherwise it's good. This is the 3rd season with 1.50 or better 60 ft times. I just delay the hit on N20 by 1-2 hundred RPM and make sure the chassis is loaded....IT WORKS![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
stock trans
-keep fluids changed
-24,000 cooler
-fingers crossed
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
rearend is a stock
-3.23
-keep fluids changed
-fingers crossed every pass
We know at some point we will have to ring FLT for a trans. The rear makes a tad bit of noise on coast, but otherwise it's good. This is the 3rd season with 1.50 or better 60 ft times. I just delay the hit on N20 by 1-2 hundred RPM and make sure the chassis is loaded....IT WORKS
![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
#36
Banned
Thread Starter
iTrader: (22)
Join Date: Jan 2004
Location: Schaumburg,IL
Posts: 4,957
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
if the weather holds Sunday we will have some new best to post after todays dyno results ![Nod](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_nod.gif)
most recent best was with the following
NA 367 rwhp and 508 rwhp N20
new #'s 430 rwhp and 556 N20
pray for good weather for us
![Nod](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_nod.gif)
most recent best was with the following
NA 367 rwhp and 508 rwhp N20
new #'s 430 rwhp and 556 N20
![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
pray for good weather for us