1.35 60' and new best 1/8th mile
12-17-2007, 10:24 AM
#1
10 Second Club
Thread Starter
iTrader: (5)
Join Date: Jun 2004
Location: Tampa, FL
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
1.35 60' and new best 1/8th mile today was a pretty good day at BMP, except when they kept running the street tire cars infront of us and everyone of them would drive right though the water box 
traction was in an issue for me most the day, but slick tire/drag radial cars got to go 1 time right after they preped and my pass went like this
1.351 60'
3.983 330'
6.225 1/8th @ 109.46
about the 1000' mark or so, i glanced at my wideband and it said 14.7 so i let out, but come to find out, the wires got jolted and was stuck on 14.7 so it really didn't go lean, just an error. wish i would of stayed in it. the run ended up at 9.88 @ 125.6
This was done on the 325 Hoosier drag radials.
here is teh video right click, save as!
traction was in an issue for me most the day, but slick tire/drag radial cars got to go 1 time right after they preped and my pass went like this1.351 60'
3.983 330'
6.225 1/8th @ 109.46
about the 1000' mark or so, i glanced at my wideband and it said 14.7 so i let out, but come to find out, the wires got jolted and was stuck on 14.7 so it really didn't go lean, just an error. wish i would of stayed in it. the run ended up at 9.88 @ 125.6
This was done on the 325 Hoosier drag radials.
here is teh video right click, save as!
Last edited by _HAVOC_; 12-17-2007 at 10:29 AM.
12-17-2007, 12:38 PM
#4
10 Second Club
Thread Starter
iTrader: (5)
Join Date: Jun 2004
Location: Tampa, FL
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
I don't know the exact cam specs, but its something like a 248/252 615 lift on a 114 LSA. The heads are 5.3's ported by Chevpower. Have not put the car on the dyno on the spray.
