Trans Am guys with Shift Lights?
02-17-2009, 02:27 AM
#41
TECH Regular
iTrader: (4)
Join Date: May 2007
Location: schaumburg,il
Posts: 425
Likes: 0
Received 0 Likes
on
0 Posts
on the topic of shift lights i have an autometer pro shift light for sale and ill give you a set of pills to go with it i believe there 6k-7k. heres the link to the shift light. http://www.jegs.com/p/Auto+Meter/745859/10002/-1. message me seperately if interested, i dont want to hijack thread. and i had mine mounted in the vent itself, the one right next to the door.
09-20-2009, 07:17 PM
#43
TECH Junkie
Thread Starter
iTrader: (19)
Join Date: Feb 2005
Location: Sandusky, Ohio
Posts: 3,155
Likes: 0
Received 0 Likes
on
0 Posts
wow... 6 months later I finally installed this damned thing lol
but it wont work!
tach wire to #10 pin, white wire on the pcm (red)
12v keyed
ground, easy
it lights up, blinks the settings back, but wont come on at the rpms, i've tried several rpms, mainly 1000, 1500 etc
yes it was in 4 cylinder mode....and nothing
checked the voltage at the connection at the pcm (which is sodered) and got 0.030VDC (or close, can't remember)
same voltage all the way up to the shift light, but nothing is working??
Can't get hold of Harlan, so what do I do? can I tap into something else and then use a different setting?
but it wont work!
tach wire to #10 pin, white wire on the pcm (red)
12v keyed
ground, easy
it lights up, blinks the settings back, but wont come on at the rpms, i've tried several rpms, mainly 1000, 1500 etc
yes it was in 4 cylinder mode....and nothing
checked the voltage at the connection at the pcm (which is sodered) and got 0.030VDC (or close, can't remember)
same voltage all the way up to the shift light, but nothing is working??
Can't get hold of Harlan, so what do I do? can I tap into something else and then use a different setting?
